Hi guys, hopefully somebody can help because I'm at my wits end here. I have a Baxi duotec 28 HE A with no heating but hot water is fine. There are no visible leaks in or outside the boiler and it has been regularly serviced.The honeywell stat and relay module have been replaced, but still no heating. Any help would be greatly appreciated. Griff
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
A
Aquarius
Do you have access to any test equipment, such as a multimeter or a two pole voltage tester? Any photo of said Honeywell stat and relay? Do these definitely work?
Thats the image off the box. I just replaced with what was originally in place. They paired without a problem, and the red light flashed which indicates that its calling for heating but having no response, so I'm pretty sure its working. No, I don't have any test equipment. G
Attachments
Last edited:
- May 23, 2015
- 35,143
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
A
Aquarius
Sounds daft, it’s do you have heating selected on the front of the boiler? Is the boiler thermostat turned up?
Yeah, everything is as it should be, just the heating won't fire. Hot water fires no problem.
- May 23, 2015
- 35,143
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
green is on so the boiler should fire if it’s connected correctly
Yeah, its all connected correctly, obviously haven't touched the boiler just had a look inside to check for leaks. Ill just have to call an engineer out. Thanks for the replies guys. Will update when I know something. Griff
Official Sponsors of Plumbers Talk
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
