Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

View the thread, titled "Calculating pipe centres" which is posted in Water Underfloor Heating Advice on UK Plumbers Forums.

Similar to radiator dT's, is there a way to mathematically calculate the UFH pipe centres required to satisfy a given room's heat demands?

150mm-250mm centres are banded about online, with no real explanation, obviously smaller centres allow for lower water temps, but there must be a more scientific way on deciding the centres for a given scenario?
 
Tbh you can work it out eg via cibse ufh guide or via a paid software but I normally go 100mm centres and work out the flow rate etc eg 1kw needs 2.04 lpm
 

Official Sponsors of Plumbers Talk

Reply to the thread, titled "Calculating pipe centres" which is posted in Water Underfloor Heating Advice on Plumbers Forums.

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.

Thread starter

Joined
Location
East Yorkshire
Member Type
DIY or Homeowner

Thread Information

Title
Calculating pipe centres
Prefix
N/A
Forum
Water Underfloor Heating Advice
Start date
Last reply date
Replies
1

Thread Tags

Tags Tags
pipe

Thread statistics

Created
eimaj123,
Last reply from
ShaunCorbs,
Replies
1
Views
470

Weekly or Monthly Email Digest

Back
Top