Connector for combined bath overflow and supply

[Tom Crowley]

I need advice on a water inlet pipe for a combined bath overflow and supply. I have uploaded photos. On one side is the attachment i need. In the attached pics one side of the fitting has the connector I need. It's missing from other side. Also how do you remove the fitting on left side? Looks like a radiator tail spanner

 

[snowhead]

I'd say hold the plug with a hex wrench then unscrew the chrome ring

 

[Tom Crowley]

I need advice on a water inlet pipe for a combined bath overflow and supply. I have uploaded photos. On one side is the attachment i need. In the attached pics one side of the fitting has the connector I need. It's missing from other side. Also how do you remove the fitting on left side? Looks like a radiator tail spanner

Silly me. Turns out hot and cold inputs are linked via a tee piece and then single mixed input enters the fitting on the right.
Forgettaboudit

 

[Ben-gee]

Yes it’s fed by a blended supply.

But you should be able to swap it to the left side if you want to, just choose the side which will be most accessible in the future once the bath is in place.