F22 and filling loop only one handle..

[Badger10]

Hi, stupid question but can anyone help...?
I had an F22 message on my ecotec pro 24. From what I've seen online I understood I had to use a screwdriver on the valve at the top of the filling loop (my filling loop only has one handle) but there isn't anywhere to use a screwdriver.... Just watched a couple of videos and they also suggest I should also have a gauge on my boiler which I don't. I've just tried turning the handle on the filling loop and the F 22 has gone any my boiler display reads 1,1. Does this sound like I might have fixed it...

Thanks for any advice!

 

[Scott_D]

Thats it
Yours has a digital gauge
1.1 bar and just above the lower dotted line on the right hand side of the display

 

[ShaunCorbs]

yes thats it

with yours you just need to turn the black handle slightly open and wait for the error message to go

 

[Badger10]

Thats it
Yours has a digital gauge
1.1 bar and just above the lower dotted line on the right hand side of the display

Ah that's great, thank you!

 

[Badger10]

yes thats it

with yours you just need to turn the black handle slightly open and wait for the error message to go

Brilliant, thanks very much!

 

[ShaunCorbs]

just on a bit of a side not when was the last time you had your combimate serviced (bottom middle/right first pic)?

 

[Badger10]

just on a bit of a side not when was the last time you had your combimate serviced (bottom middle/right first pic)?

The white box? I had my boiler serviced a year ago, not sure if they looked at that. Is there something wrong with it...?

 

[ShaunCorbs]

The white box? I had my boiler serviced a year ago, not sure if they looked at that. Is there something wrong with it...?

yes they need to be serviced / you might laugh balls replaced 😀

 

[Badger10]

yes they need to be serviced / you might laugh balls replaced 😀

Ah ok, it's due a service so I'll ask them to take a look. Thanks for the advice