Got to plumb up a vanity unit to a 110 stack which is the other side of a wall hung toilet frame.
There is enough clearance for a 32mm waste pipe to run between the back of the frame and the wall but its not a straight line. Can be done with some difficulty with a couple of push fit 135 deg bends to create a small offset or much more simply with a flexible section e.g McAlpine flexible waste. What do people think of flexible push fit waste on a basin (which will then be boxed in and hence fairly inaccessible behind the toilet.
There is enough clearance for a 32mm waste pipe to run between the back of the frame and the wall but its not a straight line. Can be done with some difficulty with a couple of push fit 135 deg bends to create a small offset or much more simply with a flexible section e.g McAlpine flexible waste. What do people think of flexible push fit waste on a basin (which will then be boxed in and hence fairly inaccessible behind the toilet.
