Fluidmaster 550 UK dual flush valve to 35mm flush pipe

[chrisdonne]

Hi,

Can anyone tell me if I will be able to reconnect my 35mm flush pipe to the Fluidmaster dual flush valve from Screwfix (P.No. 51173)?.

From the drawing this looks as though it could just be for a close coupled suite, i.e. not enough thread left to connect flushpipe back nut.

Many thanks.

Chris Donne.

 

[snowhead]

Does look like close coupled only;

http://www.fluidmasteruk.com/downloadable/download/sample/sample_id/98/

 

[chrisdonne]

Thanks, that was the sheet I was looking at and drew the same conclussion, any ideas as to what I might be able to use??

Thanks,

Chris Donne.

 

[buckley plumb]

both look at diagram 2 it says reconnect close couple or low level pipe

 

[chrisdonne]

Wow, so it does, it might be OK for me then.

Next question might have to be 'Do you know a good optician'

Thanks for your prompt reply,

Chris Donne

 

[chrisdonne]

OK, on the strength of what Buckley Plumb said I nipped down to SF in Grimsby and bought the required items, did actually get a new flush pipe as well as the old one was getting a bit tatty, all fitted dead easy and it now works like a charm so many thanks for the advice.

Best wishes,

Chris Donne