hi all ,thanks for the add,i have a question so here goes:-

[rich tucker]

Also due to the unique flow diverter built within all Revive column radiators the flow MUST to be on the same side as the permanent blank which is the opposite side to the air vent bleed valve. can i just add this to my existing system or do i have to connect it up in a certain way many thanks

 

[ShaunCorbs]

Aslong as the flow enters the correct end and you tee off your radiator circuit main pipes eg 22mm in 15mm then you should be fine

 

[rich tucker]

hi shaun ,how do i determine which one is the flow and which one is the return when teeing of my main circuit , i just thought i could use either when i lifted the floorboards ,apologies for noob question ,ive done bits of plumbing before and sometimes the wording confuses me!

 

[Ben-gee]

Turn on your heating and feel the two heating pipes you have got exposed and are going to tee off.

Whichever gets hot first is the flow.

 

[rich tucker]

Turn on your heating and feel the two heating pipes you have got exposed and are going to tee off.

Whichever gets hot first is the flow.

cheers fella much appreciated