Need help to design Hot & Cold Water System

[feder]

I am a self-builder and I am going to install the hot and cold water system (including radiators) but I need help from a qualified/experienced plumber to design it correctly - for a fee. When installed, I will call an approved boiler installer in order to comply and get the certificate of boiler installation and system commissioning. The communications will be by e-mail with drawings etc as it is not likely that the person who can help me will be local.

Any volunteers or does anybody know someone who can help?

 

[bbb]

No plumber worth his salt will "design" a water system for you. And your CORGI man will most likely insist on installing the whole c/h system. Im registered and there is no way I will sign off work unless I MYSELF have installed it because I would be the one liable if anything happened.

 

[feder]

Same thing that some electricians told me but now the electrical system is installed and approved with the help of a registered electrician. I am a Designer and if I insisted on making everything I design I would be manufacturing computers, telephones, furniture and more. So don't speak for everybody.

 

[bbb]

good luck to you then, i must have forgot designers know everything about everything. Surely if your good at what you do then you should earn a good wedge and be able to employ somebody to do all this for you, or maybe youve got too much time on your hands? Or too tight? I cannot beleive you installed all the electrics in your home and got the electrician to sign you off, tell me his name and I will report him for you😱

 

[feder]

Believe me, I woild not give the job to a small minded git like you. What are you doing in these forums, short of work? You are not going to find it with your attitude