New loo on 3 inch soil pipe

[king of pipes]

Saint gobin bud drainage centre keep it part of the wolsey group hardest bit is cutting a section of pipe out . cheers kop

 

[mutley racers]

Saint gobin bud drainage centre keep it part of the wolsey group hardest bit is cutting a section of pipe out . cheers kop

View attachment 32051

View attachment 32052

Yes expensive. Do you need to buy all the collars as well?

Can you recommend a decent grinder disc for this as I usually just use the cheapest

 

[king of pipes]

Yes you will need 3 collars to suit your pipe they are retail prices so depending on your discount its cheaper than replacing the whole stack and less damage to the property , i just use a 9" grinder with a metal cutting disc no particular make. Cheers kop

 

[mutley racers]

I wouldn't I would replace the lot

You would replace the stack no matter What? As the clips are in well and lots of them it should be fine to cut a plastic tee piece in don't you think

 

[king of pipes]

They do a support collar if your worried but i think you would be fine its how i would do it cast tee then black 110mm out the branch , no.way i would take the stack down . kop

 

[thereisawizza]

I'd replace the stack if it was a south-facing wall and in the summer. Did one last year and I got more of a tan than a week in Ibiza!!

 

[mutley racers]

They do a support collar if your worried but i think you would be fine its how i would do it cast tee then black 110mm out the branch , no.way i would take the stack down . kop

Yes but could I do it with the fernco T or plastic T. I won't be able to get a cast one today and ideally would like to finish. The out side diameter if cast is 111mm. Is that a standard 100mm cast fitting required

 

[king of pipes]

Speaking from experience i would use the timersaver anything else wont look right Fernco no i wouldnt, 100mm will fit its measured internal just get the right collars a days work , changing the stack a weeks work a tower needed in poor weather no way £1000 at least you know it makes sense get the timesaver . kop

 

[mutley racers]

Think I am going to risk the fernco

 

[mutley racers]

Cannot get a time saver until Monday

 

[mutley racers]

160 quid for the time saver

 

[mutley racers]

Speaking from experience i would use the timersaver anything else wont look right Fernco no i wouldnt, 100mm will fit its measured internal just get the right collars a days work , changing the stack a weeks work a tower needed in poor weather no way £1000 at least you know it makes sense get the timesaver . kop

Does the standard coupling go from cast iron to plastic?

 

[king of pipes]

From memory yes i think so bud hope all goes well . cheers kop

 

[mutley racers]

Great. Got all in drain centre for tomorrow. Will keep you posted. Chuffed the custard agreed

 

[Tomzas]

where abouts you putting the tee on stack ie top middle or bottom?

 

[mutley racers]

SEXY

 

[king of pipes]

Thats the stuff bud will look great when done . cheers kop