- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
Not that I could see. not being pulled off by the gas pipe either.
no put your screw driver on anything that is in contact with the fan eg surround etc 😀
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Not that I could see. not being pulled off by the gas pipe either.
Join. Stupid phoneTook it apart as much as I could at the join but it was solvent weld all the way so only access at the compression Jon above[emoji17] . Was clear
Thanks I'll try tomorrowno put your screw driver on anything that is in contact with the fan eg surround etc 😀
Any way of testing it?It does sound like the Solenoid on the Gas Valve but hard to tell Jon. Seals, trap and gas valves themselves always tend to sound similar on these...more like a hooting whistle!
Absolutely correct. It is now compulsory to look inside on each service now, if you weren't already.have you had the burner off these are known for insulation falling on burner . the turrrt can block as well try pouring hot water down inner flue but be carefull.
And when it goes wrong again in six months time, they'll wish they would have had a new boiler.
You being serious? 6 Months? It is an Icos!And when it goes wrong again in six months time, they'll wish they would have had a new boiler.
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.