B
buckley plumb
thats one tidy van mate. mines like that when i clean it untill i squash all the kit back in
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "pipe bender storage" which is posted in UK Plumbers Forums on UK Plumbers Forums.
thats one tidy van mate. mines like that when i clean it untill i squash all the kit back in
COLUMBUS, Ohio-Parker Hannifin Corp.'s Tube Fittings Division has developed a new line of tube benders with adjustable handles that make it easy to bend copper, aluminum, steel and stainless steel medium-to-light wall tubing up to 180°.
Features of Tube Benders with Adjustable Handles:
o Forms accurate bends up to 180°
o Ergonomical handle design
o Bends copper, aluminum, steel and stainless steel tube
o Available in 1/4", 3/8" and 1/2" sizes
o Vice mountable
o Uses same bend radii as 2829S benders
I'd say, my record benders will last longer.
Features of Tube Benders with Adjustable Handles:
o Forms accurate bends up to 180°
o Ergonomical handle design
o Bends copper, aluminum, steel and stainless steel tube
o Available in 1/4", 3/8" and 1/2" sizes
o Vice mountable
o Uses same bend radii as 2829S benders
I'd say, my record benders will last longer.
Last edited:
B
Blumper
Bent brackets do for everything from the benders to my multimaster in its bag........tools are the easy part, its when you've stripped out an old open vented system and have to cram in all that lovely but filthy scrap and a cylinder that no matter how long you've had it propped up on its side to drain it,....it STILL manages to spew out green gunky crap all over your best tools cos you've left it till the last thing to go in the van, its dark outside, your tired so it just gets fecked in on top of erything else and sods law dictates it leaks on your best bit of kit....every time..
one tip is to get a rubber o ring from a 110mm socket and tie a knot in the middle of it, you then have a figure 8 that slips over the end of your benders arms and stops it swinging open etc..... better for storage and carrying.
patent pending 🙂
patent pending 🙂
T
TBServices
This is how it's done folks
B
Barry98
Just what I said
L
lame plumber
Attachments
T
TBServices
It's one of these:
http://www.lawson-his.co.uk/thorsman-goliath-g250plus-goliathg250plu-p126089
Got it for summat ridiculous like £15 on offer, but its easily worth full price. Fantastic in lofts and dark spots etc.
T
TBServices
Hahahahahahahahahahahhahahaha. Joke all you want, you should still buy one lol
L
lame plumber
Lidl make the best quality rubbish bags, tesco/sainsburies always split leaving crud all over the floor
I use interlocking lid tote boxes for all my gear now and they go nicely on the racking in my workshop.
I attach the formers to the pipe bender using large heavy elastic bands.
I swapped my van for a pickup with a canopy and it's good in that it stops me hoarding junk in my vehicle and uses less fuel pushing said junk around for miles.
I attach the formers to the pipe bender using large heavy elastic bands.
I swapped my van for a pickup with a canopy and it's good in that it stops me hoarding junk in my vehicle and uses less fuel pushing said junk around for miles.
Last edited:
T
TBServices
I wish I could have a pickup, couldn't cope with the size though.
Official Sponsors of Plumbers Talk
Reply to the thread, titled "pipe bender storage" which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
- JDFheating
- UK Plumbers Forums
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
