Plug to fit broken pop up lever waste??

[Thoggy]

Hi all
anyone know if a plug will fit into a pop up waste the lever behind tap type? I've got to change some basin taps and typically the waste is the tap lever type and I could do without taking the sink off to change them, anyone have any good solutions for this.
thanks Martyn.

 

[rocketmanbkk]

Fit a sprung pop up waste.

 

[Thoggy]

Don't want to take the waste and sink off if I can help it

 

[rocketmanbkk]

Why will you have to take the sink off to fit it or new taps?

Unscrew the old taps & waste & fit new ones.

Maybe I'm missing something?

 

[plumben]

Just remove the ped, slide it to the side to gain acces while still supporting basin

 

[townfanjon]

Knowing all the loads of different size plugs, you maybe lucky, personally i would nt waste time trying to find one , just explain to the customer the problem and send them off to source the plug .

 

[Ch4 plumbing]

:iagree: As above, loosen basin screws then twist pedestal to gain access, in and out within the hour.

 

[Ch4 plumbing]

Oh and change the waste for a push button waste.

 

[Thoggy]

Cheers guys