Plume Management Kit

[jaydebruyne]

I'm being sent to fit a plume management kit for a worcester greenstar 25i tomorrow.. Are these pretty easy to fit? Do they just fit on the end of the exhaust??

Tried looking for a manual but couldn't find one.

Cheers

 

[ShaunCorbs]

very easy undo the 2 screws on the spigot out side and put the adapter on and screw the to screws back in then cut(if you have to) your plume pie and mark for clip and put elbow on the end and your done

https://www.google.co.uk/url?sa=t&r...UdePHeUdHhwKvA&bvm=bv.117218890,d.d2s&cad=rja
pg 22

 

[jaydebruyne]

very easy undo the 2 screws on the spigot out side and put the adapter on and screw the to screws back in then cut(if you have to) your plume pie and mark for clip and put elbow on the end and your done

https://www.google.co.uk/url?sa=t&r...UdePHeUdHhwKvA&bvm=bv.117218890,d.d2s&cad=rja
pg 22

Nice one, cheers Shaun 🙂 even I should be able to do that haha

 

[jaydebruyne]

it says the joints must be sealed, with flue jointing compound?

 

[mfgs]

It is very simple to do. All the joints are push fit and don't require any extra sealant.

 

[ShaunCorbs]

it says the joints must be sealed, with flue jointing compound?

fire rated silicon, but tbh never seen it done, and wouldn't bother my self as looks wrong and will peal in a few years anyway

 

[jaydebruyne]

Cool, cheers guys.. much appreciated

 

[ShaunCorbs]

Nice one, cheers Shaun 🙂 even I should be able to do that haha

live and learn did you get sorted with the gas pipe after?

 

[jaydebruyne]

live and learn did you get sorted with the gas pipe after?

dunno, the boss took over it and I didn't bother asking again