pumped system pumping over

[stevetheplumber]

All Private now, non of that washing powder signals in windows anymore when hubby away

old man out i loved seeing that in the window lol

 

[jtsplumbing]

old man out i loved seeing that in the window lol

What happened to that washing powder ?? can you remember what other ones were

 

[stevetheplumber]

dreft tide omo and daz
we had a couple of blokes who ran a scrap yard down the cali always rotten dirty and they were known as dreft and tide

 

[thompsonbrown]

thanks stevetheplumber. The water is red hot i nearly made a cup of tea whilst I was up there lol.
I will do the tests for a split coil and also check the vent is high enough. Last silly question there has to be a diverter valve doesnt there? I couldnt see one but how else do you only have hot water?.,.,.,., Thanks again Eddie

Eddie

I would say its more likely to be a pump problem than a split coil. as you say your F&E tank is lower than your hot water one.
You wont find any zone valves or diverter valves on a 4 pipe system. 2 pipes for cylinder 2 for rads
pump position and where they have linked in the feed and expansion pipework is more likely to be your problem.

 

[gassafe]

Drain the cwsc & see if the tank stops overflowing, should prove its a split coil?