Removing olives

[gmartine]

I have a puller, use a hacksaw if I can't be ****. Saw this thing and thought it might be worth ago to save a few seconds or is it worth the investment in a olive cutter (monument) for each size.

https://www.jtatkinson.co.uk/olive-cutter-15-54mm.html

 

[thereisawizza]

http://www.diy.com/departments/roth...src=aw.ds.ds&dclid=CMfOlNCh4tICFU0S0wodmpUAlA

Had these for a few years now, brilliant

 

[Paulplumb]

A pair of grips rarely fails.

 

[thereisawizza]

A pair of grips rarely fails.

Unless some muppet has graunched a 15mm fitting on soooo hard the olive has squished the pipe 🙂

 

[Gasmk1]

although you need 15 and 22 these are by far the best https://www.amazon.co.uk/Monument-2030b-Olive-Removing-Tool/dp/B0001P0FFY

 

[thereisawizza]

although you need 15 and 22 these are by far the best https://www.amazon.co.uk/Monument-2030b-Olive-Removing-Tool/dp/B0001P0FFY

I had a pair of these, were brilliant when new but when they got a bit older I found they lost there oooomph. The only reason I stick with the other type is when they get a bit blunt you can twist them a bit harder 🙂

 

[Riley]

These are brilliant and amazing for tighter spaces, https://www.ebay.co.uk/itm/112315460216

 

[PlumbBobBob]

These are brilliant and amazing for tighter spaces, https://www.ebay.co.uk/itm/112315460216

http://www.diy.com/departments/roth...src=aw.ds.ds&dclid=CMfOlNCh4tICFU0S0wodmpUAlA

Had these for a few years now, brilliant

these are what I have, great bit of kit

 

[newcastle phill]

I have one of those you linked to O.P.
Works very well and costs pennies.

 

[gmartine]

I have one of those you linked to O.P.
Works very well and costs pennies.

Yep thought it might, like the Rothy olive guillotine just with handles.

 

[quality]

Unless some muppet has graunched a 15mm fitting on soooo hard the olive has squished the pipe 🙂

I have had that plenty of times

 

[quality]

Unless some muppet has graunched a 15mm fitting on soooo hard the olive has squished the pipe 🙂

I have had that plenty of times

 

[ShaunCorbs]

Unless some muppet has graunched a 15mm fitting on soooo hard the olive has squished the pipe 🙂

😳 that might of been me 😀

 

[zzzjim]

Unless some muppet has graunched a 15mm fitting on soooo hard the olive has squished the pipe 🙂

Grauncher , could be my new middle name ! ("Just nip it up a little more" )

 

[tolly]

😳 that might of been me 😀

Im guilty aswell, prefer the security of the olive slightly crushing the tube so it cant pop off if it gets knocked about a bit...not exactly hard to do now with the wall thickness of tube being so thin.

 

[dirtydog88]

although you need 15 and 22 these are by far the best https://www.amazon.co.uk/Monument-2030b-Olive-Removing-Tool/dp/B0001P0FFY

I've got these one as well, had them now for a few years and still work perfectly well

 

[jtsplumbing]

Got some of these ! work well, except for brass olives, more often than not its back to the tried & tested junior hacksaw.

 

[zzzjim]

.... work well, except for brass olives....

Well spoted !

Back to the old , do you prefer to fit Brass or Copper olives thread .

 

[cr0ft]

I'm a bit old fashioned. Junior hacksaw a screwdriver head slot in the olive, get a suitably sized screwdriver in there and twist. Off they pop 🙂