Roca Cistern

[alig31]

Hi,

I have a Roca Cistern but the flush mechanism has broke (the bell shaped plastic which pulls up the valve). Does a generic flush valve fit as a replacement as I don't require it to be Roca unless that is the only one that fits. If so can you recommend which one I can use. I am, looking for a dual flush for the 'Green side' of me.


Kind Regards

Allan G

 

[Aquazone]

If you want to take apart the cistern from the WC pan you can fit any flush valve. Probably a Fluidmaster would be best.

if not you can twist your old flush valve with the bayonet fitting and get a direct replacement Online spares for Roca toilets cistern Spares for roca single and dual flush toilets

 

[iiplumbing]

For £13 might as well save yourself the time and trouble of taking the cistern off (with the possible added complication of making sure that the sealing donut will seal properly) completely and just replace the top half

Russ

 

[townfanjon]

defo agree with the first 2 posts, get the correct part its fitted in 2 mins.
Split the cistern and pan .......... well potentially loads of problems.