P
Plum Bob 66
Hi There
Although I usually extole the the Rothenburger Eco Pipe freezer on Monday it let me down badly and I was majorly brassed off as I couldn't get it to go below -5 degrees for love nor money so in went the bungs and job done.
As this is no cheap piece of kit I was starting to get a bit worried about repair cost ect as the unit is out off warranty. Set the freezer up at home and had one more go, no joy so decided to ring Rothenburger uk. A very helpful lady answered the phone and diagnosed the problem straight away and talked me through the fixing process. Joy of joys it was down to -23 like feacal matter of a long protrusion !!
So heres how its done at no cost to you !
Apparently air getting in the glycol mix had been a problem on the early models had been a common complaint. Incidentally the problem has been rectified in the newer models
For any body that's interested Rothenburger Uk can be contacted on 01536310300
Hope this information is useful to somebody
Happy Freezing Bob 😉
Although I usually extole the the Rothenburger Eco Pipe freezer on Monday it let me down badly and I was majorly brassed off as I couldn't get it to go below -5 degrees for love nor money so in went the bungs and job done.
As this is no cheap piece of kit I was starting to get a bit worried about repair cost ect as the unit is out off warranty. Set the freezer up at home and had one more go, no joy so decided to ring Rothenburger uk. A very helpful lady answered the phone and diagnosed the problem straight away and talked me through the fixing process. Joy of joys it was down to -23 like feacal matter of a long protrusion !!
So heres how its done at no cost to you !
- With freezer turned off lift up the front electric dispaly panel, dead easy.
- locate big silver screw on black box (cant miss it)
- Undo screw and fill reservoir to the top with tap water.
- With screw off , turn on unit and set up clamps on 2 test pipe with appropriate reducers.
- Set to desired pipe size, press the * button an then the on button
- Temp should start to drop and at the same time watch for air bubbles rising from the black tank.
- Once the air bubbles have stopped rising and machine has reached -23 and starts beeping, replace silver screw firmly.
- Let out large sigh of relief !
Apparently air getting in the glycol mix had been a problem on the early models had been a common complaint. Incidentally the problem has been rectified in the newer models
For any body that's interested Rothenburger Uk can be contacted on 01536310300
Hope this information is useful to somebody
Happy Freezing Bob 😉
