The correct order in which to place seals?

[Crooksy88]

I have a shower tray waste I'm putting together. Unfortunately the waste came with no instructions as to which seal goes where and as my first attempt resulted in a leak I thought I would get some professional advice 😉.

A is the drain slot in the shower tray.
B is a rubber seal with grooves
C is a smooth rubber seal
D is the top of the waste that screws into the bottom part (E). E also has a grooved seal built into it.

Could anyone tell me the correct order in which the seals should be mounted and if sealant should be used anywhere?

Thanks,

Mark

 

[ShaunCorbs]

c on e

b ontop of a

d through all of the above into e

 

[Crooksy88]

Thanks @ShaunCorbs

So just to confirm no sealant should be required?

 

[ShaunCorbs]

Thanks @ShaunCorbs

So just to confirm no sealant should be required?

Shouldn’t be but I would put some clear silicon on not much

 

[Crooksy88]

Between all the touching surfaces?

 

[ShaunCorbs]

Between all the touching surfaces?

Yes

 

[Crooksy88]

Cheers.