Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Aug 9, 2009
149
6
18
Maldon
Member Type
Heating Engineer (Has GSR)
I attended a job last week where there is a problem with the flush on the toilet. When flushed it still leaves paper in the pan. they had another plumber look at it and fit a new siphon and he said change the pan. thats why I was called as don't think this was necessary. I have adjusted water level and flush from 6 through to 9 litre but with no change in the problem. Spoke to Armitage Shanks and they said to clean the flush holes but it can't be this as there is plenty of water coming out of the holes. The cistern is built in and at the correct height. Does anyone has any other ideas what i could do ? Tenant has only been there since Jan and it has done it all the time but not sure if it was working correctly from the beginning.
 
Have found in the past that too much water is as bad as not enough water, normally start low and work way up until problem solved but it could also be a rim fresh stuck in the U-bend.
 
  • Like
Reactions: 1 person

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.