Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Jan 12, 2022
2
0
1
Gainsboroufh
Member Type
Other Plumber
Evening all, I’m hoping somebody can help.

I have a wet speed fit UFH system, that controls 9 loops on the ground floor, each with a separate zone thermostat, flow valve and actuator.

The problem I’m having is when the main programmer (which controls the entire system), is left on (I.e. permently during winter), the water temp rises to over 60. If I just have it on for say 3 hours in the morning, couple at lunchtime, and 3 in the evening, the temp remains a steady 45.

I’ve turned the valve on the manifold mixing valve down, but to no avail.

Also (and could be a coincidence, perhaps not), the pump remains on permanently, even when no zones are calling for heat.

If anybody can try and spare some thoughts it’d be greatly appreciated!

John
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.