Vaillant Vsmart +Nest

[microworx]

Hi all

New here for some advice from you professionals and homeowners and anyone else

This might be an Interesting one so here goes

Doing a refurb and installing a new heating system

Going for an Unvented system consisting of

Vaillant Ecotec Plus 6xx
Megaflo 250L unvented cylinder
UFH ground floor 5 Zones manifold etc
Central heating upstairs
We have 3 zone valves 1 for HW, 1 for UFH, 1 for CH

My problem now is controlling all this and what id like to do

So..

Control the 5 UFH zones with Nest connected to the heatmiser wiring centre

And control the HW and CH with the vaillant Vsmart (System pack)
purely for its weather compensation and internet capability.

I could go nest all round but they are not Ebus compatible so wont modulate the boiler


The Vsmart comes with a Vr66 control centre so i am really confused on how this will all work or if it will even work. As the VR66 assumes you are controlling 1 or 2 zones with vaillant thermo stats

Has anyone done something similar?

I know Vsmart is fairly new and its all about tech these days

Any Advice Appreciated

Thanks

 

[rpm]

Talk to whoever it was that installed the boiler?

 

[microworx]

Erm its not been installed yet i am asking if its possible before i give the go ahead - Thanks

 

[rpm]

Erm its not been installed yet i am asking if its possible before i give the go ahead - Thanks

Apologises, read it as it was all going in now.

 

[microworx]

No problem should have mentioned it too 🙂