Hi guys,
I have installed a Nordstrand 90W water pump with flow switch, which you can find on eBay and Amazon. It worked brilliantly when I first installed it, and it still provides excellent flow rate through the taps.
But it has started doing this weird thing: when I turn the tap off, the pump stops and starts about once every second. I'm fairly sure it's the flow switch that is sending the start-stop signals, but I don't know why or what to do about it.
The only way I have found to stop this is to turn the pump off, and then when I turn it back on it doesn't do it until the next time I open and close a tap. I have checked the pipework and I don't think there is a leak anywhere, so the flow switch is not detecting actual flow.
Any ideas what it could be and how I could fix it? Thanks
I have installed a Nordstrand 90W water pump with flow switch, which you can find on eBay and Amazon. It worked brilliantly when I first installed it, and it still provides excellent flow rate through the taps.
But it has started doing this weird thing: when I turn the tap off, the pump stops and starts about once every second. I'm fairly sure it's the flow switch that is sending the start-stop signals, but I don't know why or what to do about it.
The only way I have found to stop this is to turn the pump off, and then when I turn it back on it doesn't do it until the next time I open and close a tap. I have checked the pipework and I don't think there is a leak anywhere, so the flow switch is not detecting actual flow.
Any ideas what it could be and how I could fix it? Thanks