What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[ShaunCorbs]

Does it re circ the water ?

 

[MOSSEP]

Does it re circ the water?

Does it re circ the water ?

No, it could do if they had the water storage capacity but they are restricted with space.

 

[ShaunCorbs]

No, it could do if they had the water storage capacity but they are restricted with space.

so just goes to drain how are they handling the back flow risk ?

 

[Jim Goodenough]

It’s not my day today 😀

finished the boiler off and come to fire it up no oil flow either someone’s forgot to order some or someone’s nicked it which do you think the builders sticking to 😀

and then my testo decides to crap itself only just come back from service

I like the lockshield valve on leg to exp vessel - great!

What's the mini shock arrester for?

 

[ShaunCorbs]

I like the lockshield valve on leg to exp vessel - great!

What's the mini shock arrester for?

cold mains into the boiler always fit them due to quarter turn cartridges

 

[king of pipes]

These are gonna be a pita to fit 😉 kop

Made a bit of progress

 

[MOSSEP]

so just goes to drain how are they handling the back flow risk?

so just goes to drain how are they handling the back flow risk ?

Do you mean for the CW supply or drainage? The machine empties into a settlement tank and then into a Drainmajor which will pump it up about 5m to a soil stack in the building. CW wise, I'm undecided what fluid risk it is at the moment. It doesn't actually hold any water as such, it just fills at a steady rate from the top of the drum and discharges out of the bottom through an open waste. Its not possible for it to over fill into the machine itself as the water just runs straight out of it. Id like it to be CAT 3, but it might be CAT 4

 

[ShaunCorbs]

Do you mean for the CW supply or drainage? The machine empties into a settlement tank and then into a Drainmajor which will pump it up about 5m to a soil stack in the building. CW wise, I'm undecided what fluid risk it is at the moment. It doesn't actually hold any water as such, it just fills at a steady rate from the top of the drum and discharges out of the bottom through an open waste. Its not possible for it to over fill into the machine itself as the water just runs straight out of it. Id like it to be CAT 3, but it might be CAT 4

any cleaning chemicals or is it just rocks ?

 

[MOSSEP]

any cleaning chemicals or is it just rocks ?

Both, the drum

any cleaning chemicals or is it just rocks ?

It uses aggregate and chemicals, but they don’t mix with the water before going into the mixing drum, they both have separate supply lines so I can’t see any risk of contamination. I’d say that there is less risk than you would get with say a dish washer or washing machine, I might just fit a double check valve. The other option is an RPZ valve but they are pricey and not so easy to get hold off.

 

[ShaunCorbs]

Where’s the fill port below the spill level or above ?

 

[Harvest Fields]

I am Servicing all day today.

 

[MOSSEP]

Where’s the fill port below the spill level or above ?

The fill port is above the spill level so no risk of contact if it over flows

 

[Aquarius]

I am Servicing all day today.

Meanwhile on the Shaun and Mossep thread......😛

 

[ShaunCorbs]

The fill port is above the spill level so no risk of contact if it over flows

dcv will be more than good enough then as there’s an air break

 

[MOSSEP]

Replacing a pump in a pressurisation unit this morning, got to site and the bottom pan is nearly rusted through! Couldn't get spray paint in blue so white will have to do 🙄

 

[Harvest Fields]

Meanwhile on the Shaun and Mossep thread.***..😛

Thought I’d try changing the conversation... it didn’t work.

 

[MOSSEP]

Thought I’d try changing the conversation... it didn’t work.

Sorry! 😜

 

[SimonG]

I can see the end 😀

 

[MOSSEP]

I can see the end 😀

I can see the end 😀

In the nicest possible way, that looms like a nightmare of a job! I hate doing bathrooms and take my hat off to you, will look great once you have finished 👏

 

[king of pipes]

Nightmare mate theres alot of work gone into that it will be good to see it all cleaned down and finished all the best . Kop

 

[king of pipes]

Made a bit of progress

Grouting these up today i can't finish em completely as family issues have forced me to stop working from today , got metros finished done on the opposite wall but still a good couple of days to complete the job ☹️

 

[MOSSEP]

Vibro monster 50000 finished today all bar the water connection! Waiting for a solenoid valve to be delivered to it can be filled via the control panel rather than manually.

 

[ShaunCorbs]

Sooo shiny

 

[SimonG]

Well, it's done.

Before and after.

 

[MOSSEP]

Well, it's done.

Before and after.

Excellent work!