What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[SJB060685]

Measure twice, cut once.

But been there in the past, it's a real kick in the nads.

He did measure, he just didn't think 😜

 

[ShaunCorbs]

Where I went wrong I drew around the trims on the wall as it’s an old property except it goes in the trim either side 15mm feck

 

[SJB060685]

Where I went wrong I drew around the trims on the wall as it’s an old property except it goes in the trim either side 15mm feck

My above comment was me messing mate. We all have off days, or in my case weeks 😂😂

 

[EvilDrPorkChop]

I've given over with the trims, weak points tbh IMO 🤷‍♂️

 

[ShaunCorbs]

I've given over with the trims, weak points tbh IMO 🤷‍♂️

👍

 

[ShaunCorbs]

My above comment was me messing mate. We all have off days, or in my case weeks 😂😂

But your right dumbo here forgot to add the 30 mm 😂

 

[king of pipes]

We've all been there Shaun sure you'll get over it 😉 Here one I'm working on. Kop

 

[Ben-gee]

I've given over with the trims, weak points tbh IMO 🤷‍♂️

I don’t use internal corner trims, butt and scribe and then a minimal silicone bead is better I think.

However need trims on edges, although have you tried Aquamura, they do a 1200 board with one long edge finished the same as the surface - really neat job possible without a single trim used!

 

[EvilDrPorkChop]

I don’t use internal corner trims, butt and scribe and then a minimal silicone bead is better I think.

However need trims on edges, although have you tried Aquamura, they do a 1200 board with one long edge finished the same as the surface - really neat job possible without a single trim used!

Yeah I use the end trims, just not the corners. Not convinced how water tight they are, the board only lips in 5mm or so. No haven't heard of them, tbh I always use MultiPanel as haven't had any issues with them. I'll have a look 👍🏻

 

[Harvest Fields]

Multipanel for me and a bead of silicone down the edge of the internal corners

 

[Scott_D]

Ecofit pure 830

 

[stormyuk]

Good morning,

New to the forum. 👍 Hopefully can post my question later of I get my account approved.

Thanks,

 

[Lou]

All approved 🙂

 

[Deleted member 120897]

Good morning,

New to the forum. 👍 Hopefully can post my question later of I get my account approved.

Thanks,

Welcome Stormy.

 

[Harvest Fields]

I’m in the middle of finishing this off.

 

[ShaunCorbs]

Nearly there I’ve decided on old houses no trims for me

 

[Harvest Fields]

That is a cracking cut mate. Did you do it yourself?

 

[ShaunCorbs]

That is a cracking cut mate. Did you do it yourself?

There’s a join at the top as the ceiling is 2.8m ish

Yes it’s taking too much time luckily I’m on day rate

 

[Harvest Fields]

Lets not talk about how long bathrooms take please mate. I came home happy today.

 

[ShaunCorbs]

😀