Which brand plastic pipe?

[Super Mario]

What brand pushfit do you use for install for central heating system hepworth hep2o ....john guest ?

 

[REDSAW]

speedfit,, if i have too

 

[Dotty]

Yorkshire.

 

[SimonG]

Yorkshire Yorkshire Yorkshire.

See, it's not that hard to say 🙂 🙂 🙂


If I really need to then it's speedfit.

 

[Howsie]

PolyPlumb.

 

[Chalked]

If it has to be plastic. Uponor q&e.
No "o" rings and no inserts to restrict the flow.

 

[hammers4spanner]

speed fit

 

[dancinplumba]

Any, but only polybutelene not pex

 

[Subby]

Speedfit because it's more common and you don't need a tool to demount. I wish everyone used the same pipe as they aren't all compatible according to the manufacturers, and some of the others are a right b#tch to get off

 

[Unregistered]

Is hep2o compatible with the others?

 

[plumben]

JG speedfit if I have to but that rare only really use the tap connectors now with copper as I think the rubber washer is better than fibre and the ability to move it means it stays tight when tightening onto the ISO and such

 

[jonnyswamp]

On new builds, Hep for heating and Q & E for hot etc
On existing, copper

 

[GasmanxxxR1]

poly plumb

 

[Rich8]

Speed fit

 

[Howsie]

Polyplumb if you don't want it to come off, ever!

 

[tolly]

I rate speedfit as about the worst of all and only use it for temporarys, if were talking pushfit then I think polyplumb is the best with hep a close second.

If were talking just plastic in general then Rehau, Uponor and buteline are all superior IMO to the above pushfit variety's.

 

[hammers4spanner]

never use poly bum just blows clean offffffff

 

[PhoenixServices]

Polyplumb if I have to.

 

[kozak1968]

Polyplumb or hep20

 

[Tjdservices]

Only use hep2o when I use plastic. Have never got on with JG