darren bastin
Gas Engineer
- Messages
- 89
Has anybody coupled a Stuart Turner aqua boost to drive an unvented cylinder? Do not have the mains flow or pressure, any other recommendations
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
- Thread starter darren bastin
- Start date
- Replies 0
- Views 825
- boost stuart turner
Discuss Aqua boost iboost Stuart turner in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Aqua boost iboost Stuart turner in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form...
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days...
Hi,
My current hot water system needs to be replaced.
Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Newest Plumbing Threads
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 0
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 2
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0