Discuss mira event xs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

dwelling69

Good evening, I have a mira event xs and it has started to make a loud noise with only a dripple when set on warm/hot tempature -- when you turn the temp dial down to below 5 it works fine -- please can anyone help me to fix this thank you
 
It sounds like it may be starved of hot water. Are the feeds being pumped to the shower? If so, it may be the pump that is faulty.
If not, it may be the cartridge needs replacing, have a look at showerdoctor.
 
Mira event is an all in one power shower.

I'd look at the inlet filters and see if they are blocked.
 
Status
Not open for further replies.

Reply to mira event xs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We have just had our second Mira shower tray 1700 x 900 fitted the last one cracked and my replaced. my husband was having a shower today. He...
Replies
2
Views
977
Hello! Im Martyn Im new here and have joined for some advice on a couple of things. Ive got an issue with a Mira mixer shower that has...
Replies
1
Views
366
When I turn on the shower or bath, initially the pump runs (quite loudly) and only a trickle comes out. I have to alternate turning on the bath...
Replies
1
Views
145
Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated...
Replies
3
Views
422
Hi my triton shower suddenly had no water coming out after Thames water doing work outside my house, the shower just started buzzing with no water...
Replies
8
Views
254
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock