Discuss Stuart Turner pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
5
Hi, I'm looking for views from someone who has fitted a Stuart Turner flomate mains booster pump.

A combi was fitted in place of a gravity hot water bbu without checking the incoming main. The fitters suddenly realised when they came to commission that they couldn't because the pressure and flow weren't high enough. Has anybody fitted one of these pumps and do they work? I've been told by managers in the company I work for who know nothing about plumbing and heating and don't like listening to people on less money than themselves that there's nothing that can be done other than a new main. I've seen these pumps but never actually fitted one myself or talked to someone who has fitted one. Are they any good and do they work?
 
depends what the cause of the lower flow rate and pressure are you sure the main road stop tap is open fully and whats the main incoming made out of if lead replace if you can
 
Water board are insisting the issue is in the grounds of the property as they have checked their end and everything is more than sufficient. Tap is fully open and the incoming main is black alkathene. Only problem is the people I work for have a very unique way of working and the house now has to go a week at least for this to be resolved. A pump would be a quick fix that could be done tomorrow morning.
 
Water board are insisting the issue is in the grounds of the property as they have checked their end and everything is more than sufficient. Tap is fully open and the incoming main is black alkathene. Only problem is the people I work for have a very unique way of working and the house now has to go a week at least for this to be resolved. A pump would be a quick fix that could be done tomorrow morning.

if its black alk i dont think your issue is with the alk unless you live in a hard water area
 
so there isnt enough pressure or enough flow, how will sticking a pump on increase the amount of water available that isnt there already?
 
Status
Not open for further replies.

Reply to Stuart Turner pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
146
    • Like
Hi there, I’m hoping someone can help me with this problem please. I’ve searched for similar posts but not found anything helpful! My mum’s...
Replies
12
Views
613
Hello, I am renovating a small bathroom in an apartment on the 5th floor. Heating is electric, no gas or oil. I have four (related) questions...
Replies
1
Views
780
Hi, I have a hot water cylinder which feeds 3 outlets (kitchen sink, basin in bathroom & bathtap) which has never had very good pressure (probably...
Replies
14
Views
1K
Hi Everyone, For those who like a long read but I could rally do with some advice. Might be a bit long this. For background. A...
Replies
3
Views
287
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock