How much to charge to replace gas run?

[Resolute]

It's not that. The area that I work in there are too many people who will get the cowboys in to sort it out. I went to a job yesterday the guy paid £100 to move a ideal isar boiler and the gas pipe was undersized and they used a cold water isolation valve to isolate the gas. It all comes down the area that you work in.

Riddor!!!

 

[Nostrum]

£120 for the day?

better off on the books.

 

[AWheating]

£120 for the day?

better off on the books.

You are correct but direct jobs are rare currently in my area due to contract work only being fro short periods.

 

[AMGasServices]

Riddor!!!

Too right had transo come out and Capp it customer was a bit iffy but I said to him safety first.

 

[IDCHAPPY]

Too right had transo come out and Capp it customer was a bit iffy but I said to him safety first.

Serves the guy right for doing it on the cheap and the installer for being a douche and accepting it...

 

[lambchop]

Bit off topic but where in hampshire are you lambchop?

Southampton mate

 

[lambchop]

It's not that. The area that I work in there are too many people who will get the cowboys in to sort it out. I went to a job yesterday the guy paid £100 to move a ideal isar boiler and the gas pipe was undersized and they used a cold water isolation valve to isolate the gas. It all comes down the area that you work in.

Hi mate, where are you based. You will get cowboys charging silly prices doesn't mean you have to lower your price to match theirs, there must be a reason they are charging such a low price, unqualified, haven't got their own cert, cash only etc...

 

[lambchop]

Excuse above posts missed out page 2 while reading, touch screen ahhhh.

 

[AMGasServices]

Hi mate, where are you based. You will get cowboys charging silly prices doesn't mean you have to lower your price to match theirs, there must be a reason they are charging such a low price, unqualified, haven't got their own cert, cash only etc...

I know what you mean. But sometimes you have to look at the safety aspects if the house goes up in flames it's not just him that's it's affected it's the entire neighbour hood.

 

[beesley121]

materials, labour time for installation and commissioning of appliances. 120 a days labour is common around by me. 15m of 22mm seems a long run, heat only boiler?

No mate, its a ideal logic 30he combi. My pipe sizing table says it will be fine on 15metres

 

[Killy Bing]

No mate, its a ideal logic 30he combi. My pipe sizing table says it will be fine on 15metres

how many turns ?

around 7 elbows and you're gonna start be undergassed and over a 1mbar drop.
nothing else on the run ?
or at the meter?

i'd put a length of 28 to start with...

 

[lambchop]

until you lift the floor boards you don't know what your dealing with

 

[lame plumber]

It's not that. The area that I work in there are too many people who will get the cowboys in to sort it out. I went to a job yesterday the guy paid £100 to move a ideal isar boiler and the gas pipe was undersized and they used a cold water isolation valve to isolate the gas. It all comes down the area that you work in.

That is so not true! My area is considered one of the poorest around, low seasonal wages etc, but if you decide to undercharge youll get lots of crud work, however if your prices are correct for the skills you offer youll still get work, not the rubbish jobs and youll end up with a decent reputation, you may do less work, but youll bring in more, and you will watch the idiots coming and going as they fail to make a living in the long term. Dont end up like the idiots, charge a decent rate, you will get work.

pm ray for his hourly rates for last year by area, youll be surprised.

 

[julesverne]

I live in bradford west yorkshire and i charge a lot more than that but then again i dont entertain cheapskates. Its been said so many times if you chase low paying work thats all you will get in a quick race to the bottom.

 

[AMGasServices]

I will try not to entertain the cheap skates.

 

[hammers4spanner]

I do like lames thesis of charge more work less

 

[AWheating]

No mate, its a ideal logic 30he combi. My pipe sizing table says it will be fine on 15metres

if thats your total run with fittings inculded and its only that one appliance you should be fine.

 

[village idiot]

I will be putting down the first 6 meter run in 28mm pipework. You have to consider future usage, especially as the pipework is going to be ''out of sight''.

 

[julesverne]

I will be putting down the first 6 meter run in 28mm pipework. You have to consider future usage, especially as the pipework is going to be ''out of sight''.

Only if the customer is happy to pay for it which if you give them an option they more than likely choose not too. I dont believe future proofing is a requirement in the regs yet. The extra cost could cost you the job