Baxi neta tec. Boiler problem and baxi service problem.

[midlands based]

Installed a neta tec 33 yesterday and finally come to commision it last night at 8 oclock with no joy. Wouldnt fire up in the commisioning cycle so we called it a night. Went back out this morning fresh headed to try again and faced the same problem. Spoke to baxi technical who put me through numerous cycles but nothing would work. So then they advised they send an engineer. So I try and book the engineer and told that the earliest would be thursday. Ive now had to leave a customer with a system in a worse state than before I started. Firstly does anyone know anything about these boilers, I have found a lot of people with similar problems since reading up on it. And mainly, do you think Thursday is acceptable to leave someone without heating when I would say the problem is Baxi's as we have done everything as per mi.

 

[Ermintrude]

Take it off the wall and return to merchants. Demand a duotec and leave it at that. Boiler wasn't fit for purpose..... That is it didn't work out of the box

 

[midlands based]

That is exactly whats happened. Would rather it be sorted as were too busy to :nono: about with it any longer. It was purchased from Williams which I am in no way holding responsible as there service has been excellent. Where would I stand on returning this though ? And also baxi told me off the serial number that it was a 2011 boiler. Wouldnt of thought it would made much difference but suppose it does mean its a few yrs old.

 

[julesverne]

Not wanting to question your choice of boiler but its pretty well known this is a dog of a boiler. Like ermi says should have gone for a duo tec.

 

[midlands based]

As I have now found out the hard way. But that cant be blamed as to why it wont work. Unfortunately its passed the point of questioning the choice of boiler and would of expected a lot better service from a reputable manufacturer.

 

[dmheat]

If you get a duotec, don't get a duotec GA. You'll get the same issues. The ga range is dog crap. HE A all the way. Or try the new ecoblue. Or if you bought it for a cupboard fit,replace it with a logic

 

[dmheat]

Are you a member of works? If you are,you should get a priority response time,usually 24hr I think.

Another thing to try is your area sales rep for Baxi, tell him you fit 100+ boilers a year, you decided to try baxi after being a loyal worcester installer for years, and a non op boiler and a 5 day wait for an engineer is the thanks you get

 

[midlands based]

It wouldnt be far from the truth to be honest dm. There service dept are calling me mon morning so can hopefully talk to someone who can offer better then. Ive heard real good things about baxi lately but this will be my first and last.

 

[Jay Jay]

Hi sounds like gas valve stuck,due to sitting idle for some time ,no one fault just one of those things.had it a few times on other brands of boiler and each time the service engineer just smiled and got it going,it's hard to accept ESP if new customer but you have got to be honest and think twice on next job.service should be no more then 24hrs on a boiler under warranty,but it's very hard to always book jobs up.that boiler has a history of issues so like other posts said get a slighty diff model.sad to hear new boilers failing on day one though!

 

[lame plumber]

sounds like me and my pcb issue on Friday at 4:30, but I just bought a new pcb and installed it to resolve the problem, then took on the manufacturer who actually responded quite well once they had a chance to get a word in 🙂

 

[midlands based]

I had it diagnosed as a stuck gas valve before i decided to stop messing and leave it to them.

 

[midlands based]

sounds like me and my pcb issue on Friday at 4:30, but I just bought a new pcb and installed it to resolve the problem, then took on the manufacturer who actually responded quite well once they had a chance to get a word in 🙂

what boiler was that mate.

 

[dmheat]

Part of the GA issues, the bertelli gas valve sticks. Very common, it's been reworked 2 or 3 times, the latest version is reliable. Does it go through ign sequence during comm procedure?

 

[dmheat]

If you stay away from the GA boilers, then I would fit any product from baxi group fella, I really rate them. Baxi cust support (previously heateam) are typically pretty good too when after sales is concerned

 

[Billy Bob Bob]

i am in works,get next day service,only days they dont cover are xmas day and new years day,cant speak highly enough of baxi,but i only fit HEA not seen baxi for ages

 

[Ermintrude]

Are you in GSR but? There is a quick fix.

 

[midlands based]

Part of the GA issues, the bertelli gas valve sticks. Very common, it's been reworked 2 or 3 times, the latest version is reliable. Does it go through ign sequence during comm procedure?

The ignition is as far as it gets. Its there service which has bothered me the most. Its hard enough keeping a customers confidence in me and my supplied product when it doesnt work, but then having to tell them the manufacturer wont be out until thursday. Should of been a one day job with a good proffit. Its now a 1.5 day job as yet and no boiler. ive got to be on site when they attend too so will have to leave another job. Ends up being a big picture.

 

[midlands based]

Are you in GSR but? There is a quick fix.

Yes mate.

 

[midlands based]

i am in works,get next day service,only days they dont cover are xmas day and new years day,cant speak highly enough of baxi,but i only fit HEA not seen baxi for ages

Dont get me wrong gas man ive heard good stuff about them and was looking forward to trying a few of there products. I can accept that things can arrive faulty out of anyones control. Its just the service thats been offered is terrible.

 

[Ermintrude]

Yes mate.

Mod mod mod please move post