Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

cr0ft

Plumbers Arms member
Plumber
Gas Engineer
Nov 10, 2008
3,311
1,782
113
Lincoln, Lincolnshire
Member Type
Heating Engineer (Has GSR)
Hi all,

Doing my first combi boiler install the week after next. It's in a property that has just had a new gas supply fitted. How do the gas transporters normally leave the meter box for you? I'm assuming the ECV will be there and also the anaconda and regulator will be connected to the ECV already and capped off?

Do I just have to supply the gas meter to complete the meter cabinet installation? Will I need any warning notices such as ECV on/off tape or will the gas transporter do this bit?

Want to make sure I arrive fully prepared that's all.

Cheers!
 
went to one with nothing but an ecv but had a few with everything and just a cap on the outlet side read for a 28mm union so hard to say and unless you got your meter cert dont think you can fit one
 
When they instal the new metre everything inside the box will be ready for you with the exception on continuity bonding, they will put a disk in the outlet and normally leave you a 22mm male brass end to work from.
 
Around here it will be a 3/4"F (Brass) outlet from the box with a disc in themeter outlet. All labels will be there. Remember the bondingwill probably be needed. But you don't have to do it, but make sure you leave a notice.
 
I do have my meter ticket, got it just for this job. Was told I would have to supply and fit the meter myself.
 
Jobs i been to have a gas meter supplied by the service provider.

Usually just turned off with a sealing disc in the downstream side
 
  • Like
Reactions: 3 people
As above not down to you to supply gas meter, that the gas suppliers job, you only connect from the outlet side of Meter.
 
  • Like
Reactions: 1 person
not always the case as previously thought the same and phoned them up and they said its not down to them

So how would you know if meter is calibrated and how meny years would they expect you to maintain it ? and who would get the money from the standing charge,
 
So how would you know if meter is calibrated and how meny years would they expect you to maintain it ? and who would get the money from the standing charge,

then once you fit they come out and inspect and take readings same situations with water meters if there pita ones
 
Its the gas transporters responsibility to supply a meter. Call them if not there already.
As above people would be fitting allsorts if down to them
 
  • Like
Reactions: 2 people
not always the case as previously thought the same and phoned them up and they said its not down to them

Not round this way it ain't they supply the meters , I was on one job where they turned up to sort a meter out he decided to change it.Asked hm 5o have spare meter he said no they account for meters in and out .
 
So true.
This meter contract im considering - everything is accounted for booked out. Booked in
 
There are one or two on here that don't have a clue what they are talking about.

It is NOT down to you to supply the Primary gas meter.

That can only be supplied by the gas provider.
 
  • Like
Reactions: 3 people
There are one or two on here that don't have a clue what they are talking about.

It is NOT down to you to supply the Primary gas meter.

That can only be supplied by the gas provider.

I know you don't have to supply them normally, I'm just repeating what they told me as I had to supply one, they came to inspect and record the reading

dont know if they were in between contracts or what but I defo had to supply one as there supplier didn't leave one
 
Last edited:

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.