Two boiler install:- PRV location. (Pictures)

[ShaunCorbs]

Iv done quite a few of the new pumps tbh, they seem to be copying the region 5 way connectors in a way.

solving a problem that never existed...

Yep but can be a pain sometimes like the old grund not enough space in cable retainer

 

[ShaunCorbs]

Tbh mate you have done very well you had any help ?

 

[harrygashull]

Yep but can be a pain sometimes like the old grund not enough space in cable retainer

Always hurting the tips of my fingers on the old grunfoss pump wiring... at least they only need changing every 20 years lol

 

[harrygashull]

Tbh mate you have done very well you had any help ?

Thanks, not had any hands on help other than the kind advice on here.

Iv done a tonne of boiler swaps, my normal day to day is service and repair so I get to see good and bad installs of other people.

its been a nice change doing this.

 

[Stigster]

Only 3 years in and you are producing work like that! Very nice. Fair play to you for doing such a nice job and also for asking advice where needed.

You, and whoever taught you should be proud.

 

[harrygashull]

Only 3 years in and you are producing work like that! Very nice. Fair play to you for doing such a nice job and also for asking advice where needed.

You, and whoever taught you should be proud.

Thanks, I was apprentice with one of the best guys in our area, and Iv been doing bits and bobs with my dad since I was about 7

 

[harrygashull]

Got the flues in today, took a while because of the old victorian crumbly walls...

Finished the conduit off and wired the permanent live in from switch fuse spare (which turned out to be faulty after an hour of testing...)


Tommorow Ill be finishing off! , got a lad coming to commision the unvented first thing so we can sign it off!

 

[ShaunCorbs]

Got the flues in today, took a while because of the old victorian crumbly walls...

Finished the conduit off and wired the permanent live in from switch fuse spare (which turned out to be faulty after an hour of testing...)


Tommorow Ill be finishing off! , got a lad coming to commision the unvented first thing so we can sign it off!

all lies unless you have pics 😀

 

[harrygashull]

all lies unless you have pics 😀

Do you want a pic of our senior eng comissioning the tank tommorow? Haha

 

[harrygashull]

https://m.facebook.com/MCSHeating/p...5958911810619/?type=3&source=48&ref=bookmarks



https://m.facebook.com/MCSHeating/p...5962741810236/?type=3&source=48&ref=bookmarks

 

[Norcs]

The zone valves are not connected!

 

[ShaunCorbs]

and why did you tape the joints? and are you using plume mag kits?

 

[harrygashull]

The zone valves are not connected!

They are electrically connected however the house is back to brick at the moment so cannot fit rads... Will be returning at a later date to fit rads etc!

 

[ShaunCorbs]

and own up who cored the holes first and didnt double check 😀

also hope you got short probes on the fga

 

[harrygashull]

and why did you tape the joints? and are you using plume mag kits?

Yes two plume management kits, Im just in the habit of doing it for some reason, I have screwed them aswell but I just like the extra assurance that its held with tape aswell!

Of course it shouldnt go anywhere with the bracket but I can imagine things being hung from it..

 

[harrygashull]

and own up who cored the holes first and didnt double check 😀

also hope you got short probes on the fga

The problem with the first core on the right was that the customer had fitted a bracket to support the lintel? But didnt tell me so i hit it bang on... Had to move over a couple of inches.

The second flue on the right was my cock up haha..

 

[ShaunCorbs]

Yes two plume management kits, Im just in the habit of doing it for some reason, I have screwed them aswell but I just like the extra assurance that its held with tape aswell!

Of course it shouldnt go anywhere with the bracket but I can imagine things being hung from it..

if you have screwed it and has brackets , it wont go any where mate , my opinion just makes the installation look meh as the kids would say (but dont try and remove it will make it worse) something for future tho

 

[ShaunCorbs]

The problem with the first core on the right was that the customer had fitted a bracket to support the lintel? But didnt tell me so i hit it bang on... Had to move over a couple of inches.

The second flue on the right was my cock up haha..

well things happen least the boilers look like new and not covered in dust hats off to you for that

 

[harrygashull]

if you have screwed it and has brackets , it wont go any where mate , my opinion just makes the installation look meh as the kids would say (but dont try and remove it will make it worse) something for future tho

Never mind 😉 at least i can sleep easy

 

[harrygashull]

well things happen least the boilers look like new and not covered in dust hats off to you for that

Managed to get dust sheets tucked behind all the shiny stuff.