Two boiler install:- PRV location. (Pictures)

[ShaunCorbs]

Never mind 😉 at least i can sleep easy

thats all what matter in the end

 

[ShaunCorbs]

Managed to get dust sheets tucked behind all the shiny stuff.

you would be surprised how many dont and you take the old boiler off and half a kilo of dust falls down

 

[harrygashull]

you would be surprised how many dont and you take the old boiler off and half a kilo of dust falls down

Yeah, you normally find half a tonne of cement that didnt go in the flue hole aswell...


Did you notice that I have altered the condensate under the RHS boiler and taken an elbow off it.. Looked a bit gash

 

[ShaunCorbs]

Yeah, you normally find half a tonne of cement that didnt go in the flue hole aswell...


Did you notice that I have altered the condensate under the RHS boiler and taken an elbow off it.. Looked a bit gash

course i did you cant get much past me 😀 also hope the pumps not pumping with no water in 😉

 

[ShaunCorbs]

just think 37 days to go

 

[harrygashull]

course i did you cant get much past me 😀 also hope the pumps not pumping with no water in 😉

Pump was on for about 5 mins whilst testing😛 nabbed the fuse so customer cant play overnight ... Hes an engineer you know. 😉

 

[harrygashull]

just think 37 days to go

37? Haha

 

[ShaunCorbs]

Pump was on for about 5 mins whilst testing😛 nabbed the fuse so customer cant play overnight ... Hes an engineer you know. 😉

arnt they all (but they would blame you for blowing the pump/ o that pumps not working, it was before)

 

[ShaunCorbs]

37? Haha

soon be an old man with a zimmer telling all the we ones how it was in your day 😀

 

[harrygashull]

soon be an old man with a zimmer telling all the we ones how it was in your day 😀

The best one is 'it was working fine until you serviced it'

'Im sorry mrs customer but your plate heat exchanger would not become blocked by me servicing your boiler'

No your right mrs customer, I purposely stripped your boiler in the 45-60mins i was here and lodged some **** in your p2p for a laugh...

 

[Dotty]

Harry lad, can you send a pm with your gsr details to gas man please, we'll get you into the private forum then.

 

[harrygashull]

Harry lad, can you send a pm with your gsr details to gas man please, we'll get you into the private forum then.

Aye, no problemo.

 

[harrygashull]

All up and running! What do you all think?



https://m.facebook.com/MCSHeating/p...6908248382352/?type=3&source=54&ref=bookmarks


https://m.facebook.com/photo.php?fb...207520000.1449856681.&source=54&ref=bookmarks

 

[quality]

Good job that sir

 

[ShaunCorbs]

very good effort harry and you should be proud couple of niggles for me personally

gas pipe would of liked it closer to the wall and the use or musson rings as dont like clip spaces (too many of them looks like 3 - 4)

no drain offs on return pipe work (bottom sets)

and blow off would of liked a set

but thats me and im picky 😀

 

[harrygashull]

very good effort harry and you should be proud couple of niggles for me personally

gas pipe would of liked it closer to the wall and the use or musson rings as dont like clip spaces (too many of them looks like 3 - 4)

no drain offs on return pipe work (bottom sets)

and blow off would of liked a set

but thats me and im picky 😀

There is a drain off hiding at the bootom of the three gate valves on the return 😉 and there is also one on the return from the cylinder.

I agree about the clips however it was what was to hand at the time... Bould have been nice to use proper standoff clips but time wasnt permitting.

Im going back next week to flush and put inhibitor in🙂

 

[harrygashull]

Bit clearer on that lol

https://m.facebook.com/photo.php?fb...207520000.1449859260.&source=54&ref=bookmarks

 

[ShaunCorbs]

There is a drain off hiding at the bootom of the three gate valves on the return 😉 and there is also one on the return from the cylinder.

I agree about the clips however it was what was to hand at the time... Bould have been nice to use proper standoff clips but time wasnt permitting.

Im going back next week to flush and put inhibitor in🙂

you mean the lockshield valve 😀

and yes but food for thought on the next one (were allways improving)

but good job on the 28 bending

 

[harrygashull]

you mean the lockshield valve 😀

and yes but food for thought on the next one (were allways improving)

but good job on the 28 bending

Lock shield valve on there because I don't trust a drain off when flushing mains pressure haha

 

[ShaunCorbs]

Lock shield valve on there because I don't trust a drain off when flushing mains pressure haha

understand but whats why you put dedicated level valves in for flushing but fair enough as ive said before each to there own