Power flushing chemicals

[Eyespy999]

Hi, planning to powerflush a microbore system, it will be a cold flush as need to go through the pump head. Just asking what chemicals people are using, i have been using Adey recently does anyone get any better results using anything else on a cold flush?

Cheers!

 

[ShaunCorbs]

adey fernox tbh most are the same stuff im sure of it

x800/mc5 or x400 mc3

 

[king of pipes]

Adey will be fine mate go with that mc4 run in the system for a week then mc1once the system has been hot flushed and cold flushed , fit a mag filter to that will pull the rest out good luck kop.

 

[Old Account]

Adey will be fine mate go with that mc4 run in the system for a week then mc1once the system has been hot flushed and cold flushed , fit a mag filter to that will pull the rest out good luck kop.

What products would you use prior the power flush a week earlier if there is no leaks but noise in the boiler ? Silencer ? Or x400

 

[king of pipes]

X400 bud the x200 silencer is a stay in the system product much the same as x100 inhibitor works over time , each chemical manufacturer has their own products i favour Sentinal , Adey , Fernox tried and tested. Regards k

 

[ShaunCorbs]

Adey will be fine mate go with that mc4 run in the system for a week then mc1once the system has been hot flushed and cold flushed , fit a mag filter to that will pull the rest out good luck kop.

think you miss typed mc4 is leak sealer

 

[king of pipes]

Opps well spotted shaun heres a picture of what i meant to use appologies kop

 

[ShaunCorbs]

if your in the trade williams this month have a special offer on adey chems

 

[king of pipes]

Nice one bud cheers kop