F. Ing customers

[jonnyswamp]

jesus !!! , I actually thought this was a joke, absolutely lost for words, do people really do this ?

Unfortunately yes, inbreds with no inclination to go to work, but quick off the mark if they think they can make a buck regardless of the consequences. They consider it their right

 

[AWheating]

tell them to get the other engineer to report you to gas safe and you will see the engineer and them in court for fraud and defamation of character.

 

[galaxy_plumbing]

and a pump head and an actuator :lol:

aand some condense traps too 😀 looks like a scrap merchant.

 

[P J F PLUMBING]

The pic was taken 11.05 today

 

[jonnyswamp]

I've already done an invoice it was like a normal job they said I've left the boiler like this when I left and ripped them off The guy who came out today was very shocked and said to report me I've called gas safe I have done nothing wrong What's wrong with people

May be the recent GSR engineer that came out DID find it like this (obviously tampered with by someone else, after you left) and is acting responsibly, can you get his name etc

EDIT just re-read post, the other GSR engineer supposedly said you overcharged them, so is probably going to be financially rewarded by your "customer"
When the sh*t hits the fan for them, make sure the local rag knows about it and get them named and shamed, cos that's what would happen to you

 

[P J F PLUMBING]

They said its none of my business who has been out. I spoke to them and said nicely F off and said report who and what you like

 

[ADM360]

Also it looks like 2 different plate heat exchanges!!

what a complete and utter ********!!

Ask for the other engineers name and GS number so you get a copy of the report that he produced.

 

[P J F PLUMBING]

Apparently he fixed it in ten mins for £50

 

[Irish]

randomly do you know the gas pipe has been capped, old picture maybe

I was thinking the same!!

 

[Killy Bing]

Isnt that a pre formed tail for the gas? They have just taken it off and put a cap havent they?

 

[Ollieg]

Was the meter box outside??........... I know what I'd be doing.

 

[ADM360]

Apparently he fixed it in ten mins for £50

Was an easy fix for £50 as you done all the hard work the day before!

And I would say it is your business to know who attended after you, and has stated that your standard of work in poor and that you should be reported to GS, I would go as far as to say to the custard that if he is unwilling / unable to produce the report issued by the other GS engineer, then you can state that you will disregard all claims he has and pass it on the appropriate authorities for the offence of obtaining funds by means of deception / fraud and the like.

 

[Rickster123]

I can't believe this! Some people really do live on another planet. I'd ignore it. Gas safe wont be interested and there's insufficient evidence for trading standards to get involved. Send them a dog turd as a token gesture.

 

[Irish]

Even if you did leave the boiler like that surely the fact the gas pipe is disconnected and capped off means that it's unusable therefore safe , leaving you in the clear regarding gas safe no ?

 

[ADM360]

You could always say you need to get in to make sure the boiler is safe, and then when they refuse ring transco (gas transporter) and report a dangerous appliance that the custard wont allow you entry to the property to make safe and see what happens!

 

[Roger Welton]

Was the meter box outside??........... I know what I'd be doing.

No Nonsense Expanding Foam Hand-Held 750ml | NoLinkingToThis

Not recommended, etc. etc.

 

[Killy Bing]

No Nonsense Expanding Foam Hand-Held 750ml | NoLinkingToThis

Not recommended, etc. etc.

Turn off the stopcock, poke one for two cans in, then some post crete.

wait till they bust it out and get a shower of yellow foam......

 

[Irish]

Like it Killy! My favourite is still the plastic svp one, slide the clip up drill a 10mm hole empty a couple of tins of foam in slip clip back down jobs a goodun

 

[ADM360]

Its surprising as you read though different post the amount of unorthodox uses for expanding foam there are!!

 

[ADM360]

and most of there are filling holes, just not the usual one!!