So I was recently doing a gas test and service on a caravan with Not go GB24 S2, the boiler has giving off a gas rate of 0.87m3/h. I checked the inlet pressure of about 39mbar, the meter it was been fed from was brand new. The pipework was all fine. I am just wondering what should I do in this situation if I couldn't find a fault the FGA was also fine
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
- Thread starter DNA369
- Start date
-
- Tags
- gas engineer
No gas advice given on the open forum PM @Harvest Fields @ShaunCorbs or @Riley with your gas safe details and we’ll get you access to the gas safe forum. Also we need a little involvement from you. Post a few more comments, introduce yourself etc. We just want to know that you’re not just using us for our minds
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
Maybe he is hacked off because he is struggling to find a good reason to chop off and recommend a new boiler?
look forward to tomorrows replies so far its a bit cryptic
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
- May 23, 2015
- 35,144
- 1
- 14,996
- 113
- Member Type
- Heating Engineer (Has GSR)
If we are talking about output readings and gas rates. Should this be moved to a area that isn’t open?
Official Sponsors of Plumbers Talk
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
