HALL of SHAME PHOTo`s

[SimonJohns]

yeah id but which custard pays for the boiler move

The boiler owner. You cannot terminate a flue within 600mm of a boundary

 

[arran197]

Those pics are off different boilers I think.

That's correct. Approximately 25 miles apart! Lol!

 

[southcoastboile]

aparantly the boiler has been like it for 4 years and it was all working ok, got southern gas out to replace guvoner as wp at meter was low, i put boiler down as ar, after southern gas had been just for the teermination, i looked into getting a plume kit which ideal aparantly make but was told it is obselite, dont think the customer will do anything about it but at least i have covered myself

 

[kay-jay]

No plastic within 1 metre of boiler......yeah right more like no copper anywhere near boiler

A diy boiler decommissioning....

Yep that's the old balanced flue blocked with cardboard held on with filler. And a circle of card in the centre. Gas pipe is also seen isolated only with isolated valve. This was in a takeaway.

Mmm nice clean kitchen taps.....

Dirty eh? Guess what... Same takeaway.....
Would you like something to eat? No bloody chance i.ve just reinstated hot water supply to the kitchen after 4 weeks. They only rang me after a health inspection.
Sent from my GT-I9100 using Tapatalk

 

[wheeto]

Can't really see those pictures, tapatalk seems to upload very very low resolution photos (100x100 or less)

 

[REDSAW]

went to a job friday. as a speedfit coupler on the drain-off was leaking.
i recognized the house from a couple of years ago where i helped install the boiler during my so-called-gas-training with a gsr rse.
what do you think?

 

[PlumbBobBob]

how on earth did he bend that pipe on the right? or is it your handy work

 

[dancinplumba]

its a baxi

 

[Billy Bob Bob]

its a baxi

no a main LOL a BAXI in disguise

 

[GQuigley67]

how on earth did he bend that pipe on the right? or is it your handy work

do you mean the pipe that goes into the plastic overflow pipe ? that comes preformed with the boiler its the PRV connection

 

[dancinplumba]

no a main LOL a BAXI in disguise

lol g man it sez main missed it

 

[Billy Bob Bob]

lol g man it sez main missed it

its the same as a BAXI 105/80 eco he only at the time cheaper to buy

 

[diamondgas]

went to a job friday. as a speedfit coupler on the drain-off was leaking.
i recognized the house from a couple of years ago where i helped install the boiler during my so-called-gas-training with a gsr rse.
what do you think?
View attachment 5311

I'm guesing the suply cable is plugged into a socket below and there isn't any part 'L' observed ... TRV's, room stat programmer that sort of thing 🙂

I hope you've learned something since your 'training' days REDSAW? :lol:

 

[Billy Bob Bob]

i recon on the main its prv into the conden pipe,cant see the valiant picture fully though

 

[REDSAW]

forget the vailant pic, dont know how it got there.
there are no room stat, the lead is un-fixed and the condense paired to the prv goes 6meters to outside drain pipe with a 22mm speedfit on, straight through a little girls bedroom!.

 

[REDSAW]

put this up before, tenant calls for l.l. cert and found as is....

also, cooker point in middle of room un-supported for 2 meters.

this one of the meter cupboard is in a warden aided complex disabled bungalow.. there all the same council stuff.



this is one her dad did 15 years ago and didnt finish it, she says he was corgi.
and this is previous boiler.

 

[diamondgas]

forget the vailant pic, dont know how it got there.
there are no room stat, the lead is un-fixed and the condense paired to the prv goes 6meters to outside drain pipe with a 22mm speedfit on, straight through a little girls bedroom!.

Shockin! Probably done the job at a 'snip' 3k! NOT!!!

 

[kay-jay]

2nd attempt at posting better pics

Sent from my GT-I9100 using Tapatalk


can't understand it....uploaded larger images before and i can't do it now.

 

[PlumbBobBob]

do you mean the pipe that goes into the plastic overflow pipe ? that comes preformed with the boiler its the PRV connection

oh right i thought it looked too good to have been done by hand lol

 

[REDSAW]

oh right i thought it looked too good to have been done by hand lol

i have strong thumbs.lol.