HALL of SHAME PHOTo`s

[SimonG]

1 not my drill, my drill is the later version of that drill. All I can afford don't hate me.
2. Three points of contact on ladder, two feet and my enormous pen15 sticking out of my trouser leg.
3. Did not install gas pipe. Just moved boiler.
4. Took ages to drill hole.
5. It did snag once or twice but lucky the clutch works.
6. I always look good!!

I only number statements when I'm getting annoyed 🙂 🙂 🙂

 

[Kyle87]

That's not a drill, that's just.......well, hard work 🙂 🙂

Hammer and chisel would probably be quicker!!

 

[Kyle87]

Looks to have put weight on tho 🙂 🙂

Massively. I got down to 69 kilo. About 80 now.

 

[Kyle87]

I only number statements when I'm getting annoyed 🙂 🙂 🙂

Takes a hell of a lot more to ruffle my feathers love 🙂

 

[dancinplumba]

Takes a hell of a lot more to ruffle my feathers love 🙂

Ooo kyle, with that reply, I would say they are...........:waving: Xx

 

[Leo21]

Ooo kyle, with that reply, I would say they are...........:waving: Xx

Love.

 

[chris watkins]

Can you boys take your spat else where, I keep getting notified & thinking it some more interesting doggy work pic's instead its. Ooo, Love & :waving: Xx. etc.

Please can we give it a rest now ??

 

[Kyle87]

Can you boys take your spat else where, I keep getting notified & thinking it some more interesting doggy work pic's instead its. Ooo, Love & :waving: Xx. etc.

Please can we give it a rest now ??

Sorry dad 🙁

 

[chris watkins]

Sorry dad 🙁

No problem son, now how about getting off to bed you have work in the morning.
Dam!!!, now I am doing the same thing as I was moaning about, typical parent !! sorry want happen again.

 

[Whn1]

Holy hell!!!!

 

[Whyme]

Saw this today. The customer read online that lagging would stop the boiler freezing and not working. Surprising the FGA reading where spot on 🙂

youd have thought they'd have fit the right size lagging..

 

[diamondgas]

The strange use of flexi's Came across these on Friday! A PRV, note the iso valve end at the wall 🙂

And then told that a radiator downstairs didn't work....! and flow

The whole system is piped up in 15mm !!!!

Forgot the filling loop fitted incorrectly too !!!

I now understand why this landlord considers me too expensive if this is the standard of work he expects :lol:

 

[SafeGasInstall]

Check valve is facing the mains ?! How did they filled up the sc system !?

 

[diamondgas]

Check valve is facing the mains ?! How did they filled up the sc system !?

Your guess is as good as mine mate! Certainly no way of removing the 'temp' loop connection 🙂

 

[jase158]

with plumbing like this, who needs proffesionals. was loads more in the house. plastic to kitchen rad, pushfit all over attic etc

 

[Bunker]

what a lovely find. I raked out the remains of the old fire cement, straightened it up and re-cemented it, stripped off foil and redid that too. Not much more I could do to improve it as a sh** job anyway. Custard asked if the flue was the right size (4"), I thought it ought to be 5" but seems to have run ok for the last 10 years or more. Should it be 5"?

 

[Dannypipe]

View attachment 12152what a lovely find. I raked out the remains of the old fire cement, straightened it up and re-cemented it, stripped off foil and redid that too. Not much more I could do to improve it as a sh** job anyway. Custard asked if the flue was the right size (4"), I thought it ought to be 5" but seems to have run ok for the last 10 years or more. Should it be 5"?

This is why the rules for oil should be as strict as they are for gas. That's shocking. Would be condemmed if it was a gas boiler.

 

[stevetheplumber]

The strange use of flexi's Came across these on Friday! A PRV, note the iso valve end at the wall 🙂View attachment 12140

And then told that a radiator downstairs didn't work....! View attachment 12141 and flow View attachment 12142

The whole system is piped up in 15mm !!!!

Forgot the filling loop fitted incorrectly too !!! View attachment 12143

I now understand why this landlord considers me too expensive if this is the standard of work he expects :lol:

dont you just love the reducers to 15mm on the heating

 

[diamondgas]

dont you just love the reducers to 15mm on the heating

It's always made me wonder what kind of person (plumber?) turns out jobs like this and considers it an honest days work? 🙂

 

[Koogatubac]

It's always made me wonder what kind of person (plumber?) turns out jobs like this and considers it an honest days work? 🙂

Got to be fast track plumbers who dont really know what their doing diamond 😉