Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
I'm curious as to why you need to know?
It's a typical oil combi, pressure jet burner, sealed system with expansion vessel and pressure relief valve, two circulating pumps, one for hot water circuit then other for central heating (one of which looks like it's been replaced) and each incorporating non return valves. You'll have a temperature mixing valve governing hot water temperature and a boiler stat and frost stat as it's an external model.
It's a typical oil combi, pressure jet burner, sealed system with expansion vessel and pressure relief valve, two circulating pumps, one for hot water circuit then other for central heating (one of which looks like it's been replaced) and each incorporating non return valves. You'll have a temperature mixing valve governing hot water temperature and a boiler stat and frost stat as it's an external model.
Thanks for your reply, basicly just trying to find out the correct name and model and how old it is, recently replaced flow sensor with a GRANTS flow switch, coudnt find one for RHINO, Just be handy to know where to alter temperature for water and maybe tinker a bit if their was any more probs, all best
It's a Rhino 90 combi by the looks of it. I'm assuming a manual could be found online for it, although I haven't looked. Apparently flow switches are still available for it or as you said can be adapted with some other makes. If everything is working fine please dont tinker as you say.
Only one thermostat for boiler water temperature. Hot water controlled by mixing valve.
Nothing in there to tinker with.
The happy smiley face looks like a frost stat, retro fitted.
Nothing in there to tinker with.
The happy smiley face looks like a frost stat, retro fitted.
Official Sponsors of Plumbers Talk
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
