Is this glue against regulations ?

[Old Account]

hi guys,

I got called out to inspect some plumbing works.

Boiler: brand new vaillant, no filter, no reducer, no carbon monoxide alarm, prv pipe facing 2 sockets

Location: bathroom
Flue: no access to the flue at all, it looks pretty much they used an old existening flue

The prv pipe goes straight out into a little extension / bended down and right underneath is a 240v socket. It's not leading to outside.

System hasn't been flushed.
Company walked away without commissioning the boiler without registering the boiler.

What has to be done to make this to current regs and most of all safe ?

I am about to give the job to my gas safe mate. Just wondering what you think about this job and what would you roughly charge to register the boiler with gas safe? I think the flue, access and a filter should Ben installed, am I wrong ?


Would love to get an advise kind regards.

Ron

 

[Harvest Fields]

Have you got any pictures of the boiler and where it is location wise

 

[woodsy]

Looks like boiler will have to be refitted as flue looks too close to the roof and access to the flue is a must to meet regs. Filter is a must in my opinion but no regs insisting that you fit one.

 

[Harvest Fields]

The flue should be a vertical one. Not what is there but would like more pictures as if they have done that with the flue. Would like to see what the install is like.

 

[Old Account]

The flue should be a vertical one. Not what is there but would like more pictures as if they have done that with the flue. Would like to see what the install is like.

Basically the boiler is hanging in the bathroom entrance left hand side,

Flue disappears with a bend inside the extension roof without access and the flue looks also not new looks like used from previous boiler.

 

[ShaunCorbs]

All wrong get your gse to quote for a new boiler direct to customer

 

[Old Account]

All wrong get your gse to quote for a new boiler direct to customer

Ok, what shall I tell the customer why the boiler has to be re installed ? What reason can I give to do so ?

 

[ShaunCorbs]

Ok, what shall I tell the customer why the boiler has to be re installed ? What reason can I give to do so ?

What plumbing works were you there for ?

 

[Old Account]

Here are a couple of the boiler

 

[Last Plumber]

If they have used the existing flue !

Am I following you correctly Matchless. ?

The flue (and I could be wrong here), looks like the old baxi flue?
if it is the one i'm thinking of has it not got an aluminium exhaust ?

It would be RIDDOR reportable?

 

[Old Account]

What plumbing works were you there for ?

He called me up for a leak ( which I assume is central heating under a boarded floor with new carpet), plumbing under the kitchen sink very untidy pipework takes too much space, boiler loosing pressure every 5/6 weeks
Installing a new radiator vertical one.

 

[ShaunCorbs]

Wouldn't touch anything heating related till a new boiler has been fitted as its turn off and cap job

So you wernt there to have a look at the boiler?

 

[Old Account]

I also went out for banging pipework which only occurs when basin ( quarter trun tap ) and toilet is been used,

So i wanted to ask you how to solve this ... do i need to change the quarter turn valves ? Or prv at the mains ? , shock arrestor ?


What would you do ?

 

[Old Account]

Wouldn't touch anything heating related till a new boiler has been fitted as its turn off and cap job

Ok, does the flue look new to you ? To me looks the old existing one because the foam around it looks old too. Can you install a boiler in the toilet ?

Shall I tell him the boiler is RIddor and needs to be re installed to current regs ?

 

[Last Plumber]

Sounds like a 'Where shall we start job'

 

[Harvest Fields]

I wouldn't either. Get you Gas Safe mate to attend and do a report to check everything.

 

[ShaunCorbs]

Depends what does the toilet fill valve look like if it looks ok

Fit a shock arrestor under sink as I bet pipes arnt clipped

 

[Old Account]

Hahha you are quite right. Leaving the prv pipe inside the extension facing down to the sockets hahah

 

[Last Plumber]

Is that definitely the flue outside ?

The one inside looks downhill (unless it's just the photo )

 

[ShaunCorbs]

Ok, does the flue look new to you ? To me looks the old existing one because the foam around it looks old too. Can you install a boiler in the toilet ?

Shall I tell him the boiler is RIddor and needs to be re installed to current regs ?

Get your gas safe engy to do a site visit and let him do it / go through it himself