New boiler, rads keep getting cold

[Mrs Naylir]

Tower I believe are in the lower price bracket, and in my experience I would tend to stick with proven named brands such as Honeywel, Drayton, Pegler et al.

Are you able to remove the trv heads? If so, you could remove the ones where fitted and see how long they stay hot for and if the rads are indeed getting hot?

Just did as you suggested immediately went hit. Now will see if it stays that way. Will update

 

[John.g]

Just took trv head off rad immediately hot. Let's see if it stays hot. Thank you will update

The head is normally held on with a knurled nut so the head should be fitted with it fully opened (index 5) then finger tighten the nut otherwise you are trying to push in the pin at the same time.

 

[Mrs Naylir]

Tower I believe are in the lower price bracket, and in my experience I would tend to stick with proven named brands such as Honeywel, Drayton, Pegler et al.

Are you able to remove the trv heads? If so, you could remove the ones where fitted and see how long they stay hot for and if the rads are indeed getting hot?

Thank you so much it stayed on. We have put the head back on nie. Wow that was tricky as it was very very hot without it. So can I assume that it is obviously the trvs.

 

[Deleted member 120897]

Thank you so much it stayed on. We have put the head back on nie. Wow that was tricky as it was very very hot without it. So can I assume that it is obviously the trvs.

I would say trv issue yes. Perhaps the original installer and yourselves can come to some agreement?