Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

any luck now with my upload video clip of the oil gauge reading while firing up boiler
 
no because i serviced it last year and everything was fine. so i didn't see why i would need to adjust it again.
 
oil supply is fine there is enough oil in the tank.
 
are you saying it could be the pump or the oil?
 
Just because there is oil there, it doesn't mean there's enough to run it. I would bleed it for a bit to make sure of the fuel supply. It's easy and you don't have to pull anything to bits. Then pump off to make sure that the dog coupling is intact and that the motor is running at full speed. Then lid off the pump to check pump filter. Then change pump.
 
  • Like
Reactions: 3 people
Thank you very much guys for you advise. I'll see how I get on tomorrow.
 
  • Like
Reactions: 1 person
Hi Simon can you explain how I can get into the plumber arms
 
Just because there is oil there, it doesn't mean there's enough to run it. I would bleed it for a bit to make sure of the fuel supply. It's easy and you don't have to pull anything to bits. Then pump off to make sure that the dog coupling is intact and that the motor is running at full speed. Then lid off the pump to check pump filter. Then change pump.

^^^ This.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.