Powerflushing - Where do you connect it?

[ShaunCorbs]

If you flush through the combi you let it run ? If so, you will feck the pump one day because if you change the direction of the pump then you got 2 pumps working against each other.

I don't think it's good to flush through and will not do it in the future. To push all the mick through the heat exchanger etc don't think it's the right way. I'd rather would flush the heat exchanger seperatly. Someone told me recently he flushes with the biller running in low speed but just in one direction because of the pump. But as mentioned I would not do it will be too expensive if something goes wrong

He doesn't use a power flusher just the mag unit

 

[Old Account]

He doesn't use a power flusher just the mag unit

I know, I was just general speaking, I don't even know why it quoted. However, i didn't want to comment on him particular just comment on to the subject

 

[RoryD]

If you flush through the combi you let it run ? If so, you will feck the pump one day because if you change the direction of the pump then you got 2 pumps working against each other.

I don't think it's good to flush through and will not do it in the future. To push all the mick through the heat exchanger etc don't think it's the right way. I'd rather would flush the heat exchanger seperatly. Someone told me recently he flushes with the biller running in low speed but just in one direction because of the pump. But as mentioned I would not do it will be too expensive if something goes wrong

You certainly wouldn't flush the old combis with diaphragm diverters. I use a magna cleanse because it uses the boilers own pump and also there's no changing direction.

 

[Old Account]

You certainly wouldn't flush the old combis with diaphragm diverters. I use a magna cleanse because it uses the boilers own pump and also there's no changing direction.

Does it help? How long do you flush it through ?

 

[RoryD]

You have to check the magnetite on the magnets

 

[Old Account]

You have to check the magnetite on the magnets

Thanks Rory,

How degrees you let the boiler run on ? You are not using any chemicals do you ?

 

[RoryD]

Thanks Rory,

How degrees you let the boiler run on ? You are not using any chemicals do you ?

Mate I'm out of this conversation...not sure if this is awind up. Find out on youtube.

 

[ShaunCorbs]

For anyone who doesn't know

 

[Old Account]

Mate I'm out of this conversation...not sure if this is awind up. Find out on youtube.

Isn't a wind up just wondering as I do not flush through boilers at all.

 

[ShaunCorbs]

Isn't a wind up just wondering as I do not flush through boilers at all.

yes you do, as ive had the same conversation with you remember you trying the flush the boiler and pipework with the boiler valves closed, you were wondering why there was no flow through the mag unit

and i guess you dont use the mag unit to attach your flushing equipment

 

[Old Account]

yes you do, as ive had the same conversation with you remember you trying the flush the boiler and pipework with the boiler valves closed, you were wondering why there was no flow through the mag unit

and i guess you dont use the mag unit to attach your flushing equipment

No i don't !!!!

And yes boiler valves are shut because I don't want to flush through the boiler. It ain't good. I always attach my mag unit ... how do you know how I work mate?

 

[ShaunCorbs]

No i don't !!!!

And yes boiler valves are shut because I don't want to flush through the boiler. It ain't good. I always attach my mag unit . how do you know how I work mate?

Because you phoned me up and asked me why it wasn't flowing and if you attach it to the filter you can't do it any other way (than going through the boiler)

 

[RoryD]

I have to question qualifications here. Are you trained?

 

[Old Account]

Because you phoned me up and asked me why it wasn't flowing and if you attach it to the filter you can't do it any other way (than going through the boiler)

If I do a power flush I do t need to flush through the boiler it will work without it

 

[ShaunCorbs]

If I do a power flush I do t need to flush through the boiler it will work without it

so you tee in below the boiler with some tees?

 

[RoryD]

so you tee in below the boiler with some tees?

😀