Rems,ridged or dewalt

[Old Account]

Hi guys,

just wondering what your thought on those both machines. I am thinking to get finally a crimping machine and not to sure which one I should go for. Must be cordless

if you gave any opinion or advise I'd be happy to hear that.

kind regards

ron

 

[Killy Bing]

Rems mini is flexible for 35mm and smaller.
Stud cutter available and 45° jaws to get into angles

The novopress 102 is a nice little machine 35mm and smaller too

Novopress 203 upto 67mm copper is my preference.

The dewalt isn't available yet and the ridged is too clunky.

Hire them, do a job and see for yourself

 

[ShaunCorbs]

Rems mini is flexible for 35mm and smaller.
Stud cutter available and 45° jaws to get into angles

The novopress 102 is a nice little machine 35mm and smaller too

Novopress 203 upto 67mm copper is my preference.

The dewalt isn't available yet and the ridged is too clunky.

Hire them, do a job and see for yourself

just a add stud and 45 will work with the novo as well

 

[Chalked]

The rems is light and can get into awkward spots. But feels cheap. I've heard the jaws don't last that well too.

 

[ShaunCorbs]

The rems is light and can get into awkward spots. But feels cheap. I've heard the jaws don't last that well too.

Also noise (louder) and takes longer to press than others

 

[Masood]

Ridged for maximum pleasure.... 😛

REMS have reliability problems. My mate went through 3 machines before finally buying something else...

 

[Masood]

Ridged for maximum pleasure.... 😛

REMS have reliability problems. My mate went through 3 machines before finally buying something else...

 

[Old Account]

Thanks you all for your help. I was thinking to go for rems because my brother has got the rems back in Germany and he had never met issue.

But I also consider now Masood answer and will think twice before purchasing a machine. I think I'll as mentioned above hire and compare them.

I appreciate your advise and opinions

Thanks very much ! Thumbs up

 

[Chalked]

Second hand mapress for less than the rems. .?

 

[quality]

I dont own one but have used mapress and it worked ok

 

[tolly]

Novopress/Geberit ACO203 or get a secondhand aco202. Prefer them to the rems, wish novopress made a stud cutter though.

 

[ShaunCorbs]

Novopress/Geberit ACO203 or get a secondhand aco202. Prefer them to the rems, wish novopress made a stud cutter though.

they do

 

[ShaunCorbs]

Novopress/Geberit ACO203 or get a secondhand aco202. Prefer them to the rems, wish novopress made a stud cutter though.

they do

 

[tolly]

they do

Have you got a link to them Shaun, the rems ones don't fit the novopress 202/203 do they?

 

[tolly]

they do

Have you got a link to them Shaun, the rems ones don't fit the novopress 202/203 do they?

 

[ShaunCorbs]

Have you got a link to them Shaun, the rems ones don't fit the novopress 202/203 do they?

they do 🙂

 

[tolly]

they do 🙂

cheers Shaun, I presumed rems and novopress jaws were incompatable.

 

[ShaunCorbs]

cheers Shaun, I presumed rems and novopress jaws were incompatable.

no there fine ofcoure the mini jaws wont fit the 202-3

 

[Chalked]

they do 🙂

Are you sure the rems one fits?
I have one and it's too small.

 

[Chalked]

they do 🙂

Are you sure the rems one fits?
I have one and it's too small.