M markadams Plumbers Arms member Plumber Gas Engineer May 9, 2019 #1 Has anyone tried to clean a partially blocked secondary heat exchanger using system chemicals instead of removing and acid cleaning or replacing it. Got a vokera procombi 85 he which goes cold unless the flow is very low.
Has anyone tried to clean a partially blocked secondary heat exchanger using system chemicals instead of removing and acid cleaning or replacing it. Got a vokera procombi 85 he which goes cold unless the flow is very low.
townfanjon Esteemed Plumber Gas Engineer Subscribed May 9, 2019 #2 Dont think you can pal . Take them off and clean them , brick acid , spirit of salts etc etc .
A Aire May 9, 2019 #3 Depends on whether it's the heating side sludged up or a scaled up hot water side. I've always had good results using fx2
Depends on whether it's the heating side sludged up or a scaled up hot water side. I've always had good results using fx2