What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[king of pipes]

Blast from the past I fitted this HRM Wallstar in 2003 that's 19 years ago same pump same expansion vessel been a good work horse this one , now time to upgrade so swapping it out for a Houndsfield external oil boiler got to rebuild the walls first 🤣🤣😉👍.kop

 

[Scott_D]

Vaillant 838. Not a pretty job, a few setbacks with the stop tap not working fully made it a rushed finished.

 

[king of pipes]

Vaillant 838. Not a pretty job, a few setbacks with the stop tap not working fully made it a rushed finished.
View attachment 75792

You using press fit now Scott I got myself a Rems mini what are you using mate ? Got some fittings off bes where to you get yours ? Kop

 

[Scott_D]

You using press fit now Scott I got myself a Rems mini what are you using mate ? Got some fittings off bes where to you get yours ? Kop

I have a 10 year old rems.
I get fittings from Williams, usually aqua gas but I only use it occasionally for speed or is there’s water or a quick repair due to cost of fittings.

 

[SimonG]

Blast from the past I fitted this HRM Wallstar in 2003 that's 19 years ago same pump same expansion vessel been a good work horse this one , now time to upgrade so swapping it out for a Houndsfield external oil boiler got to rebuild the walls first 🤣🤣😉👍.kop

Great boilers the hounsfield.

One I did last year. Old worcester through the wall.

 

[Scott_D]

logic going to F2

 

[Jim Goodenough]

Blast from the past I fitted this HRM Wallstar in 2003 that's 19 years ago same pump same expansion vessel been a good work horse this one , now time to upgrade so swapping it out for a Houndsfield external oil boiler got to rebuild the walls first 🤣🤣😉👍.kop

Very neat brickwork Wayne!

 

[Jim Goodenough]

Great boilers the hounsfield.

One I did last year. Old worcester through the wall.

And very neat stonework Simon!

 

[Jim Goodenough]

You using press fit now Scott I got myself a Rems mini what are you using mate ? Got some fittings off bes where to you get yours ? Kop

Did you get the tray with the fittings Wayne?

 

[king of pipes]

Did you get the tray with the fittings Wayne?

No Jim I picked it up in B&M nice deep trays not super strong but keeps fittings organised . 👍😉

 

[king of pipes]

Nearly there on this one wiring condense and some more making good to do . Kop

 

[Jim Goodenough]

No Jim I picked it up in B&M nice deep trays not super strong but keeps fittings organised . 👍😉

I've got a couple of the Fatmax ones and various others.... I do like the Fatmax ones but at £15 - £20 each I think they're overpriced......

 

[Jim Goodenough]

Blast from the past I fitted this HRM Wallstar in 2003 that's 19 years ago same pump same expansion vessel been a good work horse this one , now time to upgrade so swapping it out for a Houndsfield external oil boiler got to rebuild the walls first 🤣🤣😉👍.kop

How do you get on with your Milwaukee pipe cutters Wayne?

I got a set from Screwfix 2 or 3 years ago, haven't used them much.

 

[king of pipes]

To be honest Jim I haven't used it much either but its a handy tool to have good for stripping out. Regards Wayne

 

[king of pipes]

Finished off Houndsfield external oil boiler today making good all done ✓ new kitchen carcasses supplied and fitted ✓ condense soakaway done ✓ . Kop

 

[ShaunCorbs]

There’s my little holiday down in new quay (wales) 😀 not bad for 3 days total inc travelling

 

[Deleted member 120897]

There’s my little holiday down in new quay (wales) 😀 not bad for 3 days total inc travelling

I see you’ve gone rogue from typical Caravan style wastes being ran in 1 & 1/4” 😂

 

[Deleted member 120897]

I haven’t been doing much this week as my dad passed away on Saturday 😢 I went in Monday, but it was too difficult.

 

[ShaunCorbs]

I see you’ve gone rogue from typical Caravan style wastes being ran in 1 & 1/4” 😂

brings back the 3/4 flexi tube 😀

Sorry to hear about your dad ?

 

[EvilDrPorkChop]

Day 11 on this mammoth of a bathroom job. Be glad when it’s done.

 

[EvilDrPorkChop]

I haven’t been doing much this week as my dad passed away on Saturday 😢 I went in Monday, but it was too difficult.

Sorry to hear about your Dad.

 

[Deleted member 120897]

Thanks @ShaunCorbs and @EvilDrPorkChop. Literally one of the hardest things to watch happen.

 

[ShaunCorbs]

What’s all the wires for by um guessing the sink ?

 

[SimonG]

I haven’t been doing much this week as my dad passed away on Saturday 😢 I went in Monday, but it was too difficult.

Sorry to hear about your dad. Work will be there, dont worry about it and take time for yourself.

 

[EvilDrPorkChop]

What’s all the wires for by um guessing the sink ?

They're for the UFH controller and Fuse Spur for the Towel Rail. They're going in the back of the vanity out of the way and sight and reach.

They didn't want anything on show in the bedroom. They've got some Silk wallpaper that cannot be damaged as it's something ridiculous to replace and damages easily. And they don't want any Switches or Stats on show full stop. The bathroom who have supplied the lot really should of advised them better, already had to swap the UFH stat for one they can remote program off their phone.