Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Install the app
How to install the app on iOS

Follow along with the video below to see how to install our site as a web app on your home screen.

Note: This feature may not be available in some browsers.

S

Sackboy

Hi,

New to the forum, been gas safe for a few years now but need help with oil boilers!

Currently got a very old oil heat only boiler on an open system feeding 12 rads and hooked up to an unvented hot water cylinder. The boilers in an outside cupboard but needs to move to the garage after a house extension is going to incorporate the old boiler room.

What are the best oil boilers?
Are external boilers any good?

struggling to find much info online, it seems worcester Bosch and Grant are the best options?

What's the condensing side like? Are they proper condensing or work with a secondary heat exchanger (which always leak and corrode everything in sight!)

thanks sackboy
 
Grants all day long, hate oil worcestors! just personal preference. External grants are good, the combis are quite large but if you need a heat only then i would go for grant.
 
Grant or Worcester. Can't sell anything else, particularly to the boys who do a lot of oil. Mostly Grant to be honest, but Worcester also has its followers.
 
Grant my no1 choice there are those who will recommend worcester. Worcester have redesigned their boilers because of problems they hsd before so I would be dubious about them until their teething troubles have sorted themselves out. Having said that I installed their mk2 heatslave the other day. Nice boiler but I wouldnt want to go to a breakdown on it. They rely on fault codes and it has been designed around their gas boilers. Nice bit of kit if nothing goes wrong with them
 
Thanks for your replies.

looking online there seems to have been issues with grants and leaks/expansion issues but these appear to be with the combis.

The general consensus online appears that all condensing oil boilers have problems with the condense side of things. I don't want to end up with the oil equivalent of a Ravenheat Csi85 or vokera syntesi which need replacing after 3 years!
 
Funny that. I prefer the externals.
Not the fact that its outside, more the poor design.
when the auto air vent on a Grant wall hung external fails, it leaks onto the pump and frys the pump. Then if its cold everything freezes.
 
  • Like
Reactions: 1 person
Thanks for your replies.

looking online there seems to have been issues with grants and leaks/expansion issues but these appear to be with the combis.

The general consensus online appears that all condensing oil boilers have problems with the condense side of things. I don't want to end up with the oil equivalent of a Ravenheat Csi85 or vokera syntesi which need replacing after 3 years!
Never had a ptoblem with the condensing side of any oil boiler if its fitted right.
 
I have to be honest, I like the Firebird condensers but they're betterer if they're installed on a couple of blocks to raise the condensate trap to a working level.
 
  • Like
Reactions: 1 person
I think I am correct that Grant boilers are more efficient than Warmflow boilers. Not surprising really, when you compare the way each are baffled.
Most of the non combi Grants are from 93% to 97% efficient Sebuk - which is actual efficiency over a year. At the price of fuel, the extra saving will always be considerable - even if you only use small amount of oil each year.
Grant Vortex is the better Grant boiler with a larger secondary exchanger. Very easy to service. Can't say how long they will last until they leak someday, but so far they seem reliable & Grant were making condensing boilers many years ago & were ahead of many other manufacturers.
All combi oil boilers are trouble, so avoid.
 
Last edited:
  • Like
Reactions: 1 person
Hmm, grants, warmflow or firebird for me.
worked one a pair of mistrals and.....don't...
worcesters older offerings were/are a pain to work on, particually the damn heatslave combis.

avoid an oil combi like the plague, ive found firebird externals the worst combi wise (of my choices)

Fire birds need to go up on a slab or two, their condence connection is right on the base.

In a garage? Any of the three.

could always go for a boiler house model?

Again if you fit a mistal...i'll bribe a mod to change your tag to somthing else ending with sack!
 
If you do decide to put a boiler into the garage, it is the better place for a boiler IMO for various reasons - neat & hidden, easy to service & replace & nice & dry, particularly for a service guy.
The only issue & this also applies to an outdoor boiler, is that pipes to the boiler need to be fully insulated & protected from damp ingress - particularly if underground, so need ducted, or if you don't then you will lose serious heat from the boiler.
 
  • Like
Reactions: 1 person
I have to be honest, I like the Firebird condensers but they're betterer if they're installed on a couple of blocks to raise the condensate trap to a working level.

good point on the blocks, firebirds for cheaper choice grant if you spend a bit more, wb if you want to go to hell.
 

Official Sponsors of Plumbers Talk

Similar plumbing topics

We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.