You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
flexi
The flexi disc (also known as a phonosheet, Sonosheet or Soundsheet, a trademark) is a phonograph record made of a thin, flexible vinyl sheet with a molded-in spiral stylus groove, and is designed to be playable on a normal phonograph turntable. Flexible records were commercially introduced as the Eva-tone Soundsheet in 1962, and were very popular among children and teenagers and mass-produced by the state publisher in the Soviet government.
Hi all
I have this McAlpine overflow and waste HC2650UK:
https://mcalpineplumbing.com/sites/default/files/uploads/installation-instructions/hc2650uk_2.11.2018.pdf
The flexi overflow is not long enough. I thought it might be possible to extend it by fitting ordinary pipe and an appropriate...
Hi my toilet is leaking both from the water inlet and from the existing copper piping. I'm usually quite handy and many many years ago, I replaced the water inlet for this cistern.
However last week, it began leaking, initially from the copper piping leading into the cistern. I tried to tighten...
We have just become aware of Flexi Hoses fitted in walls of our Apartment Block.
The hoses supply shower mixer taps.
One of our owners, a retired builder said that it is illegal. Plumbers who came to repair leaking pipes also confirmed that using Flexi Hoses in an enclosed wall space is...
In december I had a gas safe registered company carry our an inspection on my food trailer with a view to obtaining a Gas Safety Cert. The engineer informed me that the small bore pipe to my two fryers was not sufficient for the appliances, and that he would also need to fit flexi pipes to the...
Hi ,i moved my sink about 1meter and now i need to use longer flexi-tails.
The distance now is about 2 meter for hot and for cold from boiler to the sink.The flexible pipes are short and i was looking for longer tails.The longer i can find is about 90cm i think.should i use 2 or even 3 of them...
Hi,
I have an issue with my downstairs toilet. The Flexi pip splits and tears within weeks of being installed. All signs point to it being rats... and other pictures of the damage look similar but the Flexi is on a bend at that is The only place the damage its. It also has a hole in the water...
Has anyone else had recent problems with these???
Finished a new bathroom install 2 weeks ago to be called back become the compression joint had shot clean of the copper tube. Differently fitted to 22mm tube. I'd done the compression up so tight I struggled to undo with grips and adjustable...
Hello,
I’m trying to fit a new Grohe tap. Flexi hoses are 15mm and don’t fit the 21mm (guessing it could be 22mm?) existing thread on the water feed valves. See pictures attached.
Is there an adapter I can buy?
Or do I need to replace the valve for a 15mm one? The copper pipework itself for...
I recently did a new school. Fitted a couple wash hand sinks in the classrooms. The supplied taps came with flexi’s so the lads just used them to connect up. Had a snagging list now saying to remove the flexi’s. So i will go back and fit m10 copper tails instead of the flexi. But my question is...
Hi, I have just purchased a kitchen tap. I have extremely low water pressure and I'm having trouble finding a tap that actually gives me any water, particularly hot water. Anyway the tap I have bought says it is for low water pressure (MICOE HOME - KITCHEN SINK TAP - QHKF11) however when I...
Hey guys
I've got an integrated electric oven with a gas hob directly above.
How do I connect this hob to gas? I've done a bit of googling and I've read that you can connect the hob to the gas line with a flexi pipe only if the manufacturers instructions permit you to do so (please correct me...
Saw a photo a customer showed me of what seemed to be a flexi installed on an expansion vessel serving a small electric water heater by someone he found who was cheaper than me. I say 'seemed to be' because I'm not sure from the angle of the photo whether the flexi was attached to the vessel or...
Hi,
Grateful for any help on this problem.
I have a Harvey's water filter running a John Guest 3/8" outlet pipe.
I need to connect this to my 3 way tap, which has a flexi tap connector (male) which has an 11mm thread (approx).
Thinking I had this sussed, I ordered a 3/8" x 7/16" UNS tap...
Hi - apologies for the stupid question but really struggling to find the right answer (I'm a novice as you'll see).
New kitchen tap fitted with 2 flexible tap connectors. The ends (which connect to the incoming pipework) have a diameter of 22mm and have female connections.
I need to connect...
Hello ,
Bought a ex display tap and sink the other day and I was wondering what Flexi pipe I need here. I want a compression fitting the other end but what goes at this end.
The end with the o-ring is threaded and it copper pipe looks like it pressed into the casting of the tap.
If anyone...
Can anybody help please.
Can someone tell me if the flexi connector in the picture on the toilet fill has too tighter a bend on it i have asked my plumber if he would connect the toilet in copper because 1 I think it would look better and 2 i think it is bent so much it may fail prematurely.
He...
Hi,
I'm installing new combi taps on my bath
Swirl Period Deck-Mounted Lever Bath/Shower Mixer Tap | Bath Taps | NoLinkingToThis
Would this flexi hose be suitable - the inlet pipe is 21mm
Flexible Hose with Valve 22mm x ¾
cheers
Brendan
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.