Vaillant Ecotec pro Low working gas pressure

[Victor555]

ID

 

[ShaunCorbs]

P1 is the gas valve he hasn’t added his restrictions

14 plus 3.5 of vaillants are 2.5mbar 17.5 working at the gas valve

Low working pressure is not id unless it effects combustion

 

[Last Plumber]

P1 is the Boiler running at Max and he has tested the pressure at the valve. Shaun is right with the drop on a Vaillant in that the pressure will be higher at the appliance inlet than at the valve test nipple. Your Boiler will be three this year and I can't remember when the manual was altered but if you have the one left by the installer and it says 13 mb min, then ask them to come back.

 

[Old Account]

The boiler also has not been cleaned as it should be done annually. He did not open the burner and cleaned and checked the electrodes. I would also say that the gas rate seems dodgy to me meaning I don’t believe he has ever done it. However, I would call them back

 

[Victor555]

Was it Vaillant that Serviced it?

Yes, after a long phone call today, another engineer has been booked for tomorrow.

 

[Harvest Fields]

Yes, after a long phone call today, another engineer has been booked for tomorrow.

I will be surprised if they got it wrong then mate. Don’t be annoyed if they say exactly the same thing.

 

[Scott_D]

The boiler also has not been cleaned as it should be done annually. He did not open the burner and cleaned and checked the electrodes. I would also say that the gas rate seems dodgy to me meaning I don’t believe he has ever done it. However, I would call them back

It’s not required every year

 

[Harvest Fields]

It’s not required every year

You’re supposed to remove and check on annual inspection mate. It is the seal that is not needed every year. I hate to say it but on this occasion I believe he is correct.

 

[sammathias]

4.5mb drop through them gas valves lads. Well that's what vaillant tech once told me

 

[Scott_D]

You’re supposed to remove and check on annual inspection mate. It is the seal that is not needed every year. I hate to say it but on this occasion I believe he is correct.

New seal needed every time the burner is removed?

 

[Harvest Fields]

New seal needed every time the burner is removed?

Only if damaged or worn.

 

[sammathias]

New seal everytime

 

[Harvest Fields]

Not saying it shouldn’t be. Just saying what is in the instructions.

 

[sammathias]

Not saying it shouldn’t be. Just saying what is in the instructions.

In all honesty they don't seem to need to be changed every service but I do for piece of mind. Only £13. Get what your saying tho

 

[Old Account]

It’s not required every year

That’s the reason why boilers last 10-14 years in uk

 

[Old Account]

You’re supposed to remove and check on annual inspection mate. It is the seal that is not needed every year. I hate to say it but on this occasion I believe he is correct.

You don’t need to hate that 🙂

 

[Old Account]

Only if damaged or worn.

I replace every year as required. Once you remove the burner you should be using a new seal as well as the sealant which is supplied. Doesn’t cost much to replace the seal

 

[Victor555]

Was re-checked and passed no ID. pressure 15.5mbar