Gas hob installation please help

[plumbdoctor]

Hi all
i am having a brain freeze moment got a gas hob have not fitted one for years ! Have a 1/2 inch male cylindrical connection, has fibre washer no nut, what fitting do i need so I can connect my 15mm copper to it ? Cos obviously a normal nut and olive would not work.
Cheers peeps

 

[Dotty]

1/2" female iron to copper.

 

[JAH HEATING]

Do you use conex with it being behind the oven ?

 

[plumbdoctor]

It says you can use flexible pipe but I'm not wanting to use that, cheers croppie knew it was something simple just the fibre washer it comes with and the thread three me off track

 

[plumbdoctor]

How do u post pics on here ?

 

[JAH HEATING]

Using a flex on a hob is a no no ???

 

[dancinplumba]

If mi's state cooker hose is ok then its ok

 

[REDSAW]

mines on a flex!!

shouldhave seen the gs inspectors face when i showed him, lol

depends on mi's

 

[JAH HEATING]

Well I never knew that, always thought it had to be rigid

 

[REDSAW]

generally for good practice, yes!

unless proven otherwise, ie; on a l.l.c i would fail it unless the m.i's were there and said other wise.

 

[plumbdoctor]

This is similar to to I have

 

[plumbdoctor]

You sure you can connect onto it with 1/2 female iron to copper ?

 

[JAH HEATING]

That's all I use, or m.i to copper

 

[Reg Man]

You need the fibre washer, because an traditional MI X Copper has a parallel thread and the hob connection is also a parallel thread, so you will not get a good joint Parallel to parallel unless you use the fibre washer. Common mistake that leads to many hobs leaking on the connection. As previously stated, a flexi is ok if the MI's say so, but not usual practice, I always prefer a ridged pipe.

 

[dancinplumba]

You need the fibre washer, because an traditional MI X Copper has a parallel thread and the hob connection is also a parallel thread, so you will not get a good joint Parallel to parallel unless you use the fibre washer. Common mistake that leads to many hobs leaking on the connection. As previously stated, a flexi is ok if the MI's say so, but not usual practice, I always prefer a ridged pipe.

What's ridged pipe 🙂

 

[clarky101]

What's ridged pipe 🙂

It's what my bender does to copper pipe.....

 

[Reg Man]

What's ridged pipe 🙂

Yes terrible spelling, must try harder.

 

[plumbdoctor]

Thanks guys so as long as I use the fibre washer supplied with a female iron and either gas ptfe or gas jointing compound I should be ok ? Never new about the washer cheers reg man

 

[ManchesterGas]

You don't need ptfe or gas jointing compound with a fibre washer

 

[Mike Jackson]

I'm now using BES item number 12880.